5V0-22.23 Certification Overview - [Jan 05, 2026] Latest 5V0-22.23 PDF Dumps
The Best VMware 5V0-22.23 Study Guides and Dumps of 2026
VMware 5V0-22.23 exam is part of the VMware Certified Specialist – vSAN 2021 certification. VMware vSAN Specialist (v2) certification is designed to validate the skills and knowledge of professionals who work with VMware vSAN technology. It demonstrates that the candidate has the skills and knowledge required to design, implement, and administer VMware vSAN solutions. VMware vSAN Specialist (v2) certification is highly valued in the industry and can help professionals to advance their careers.
NEW QUESTION # 15
A vSAN administrator is responsible for managing a customer's production vSAN cluster that is going to be used to provide SMB file shares to a number of host clients. The vSAN administrator must take action so the performance of all services in the production vSAN cluster can be monitored.
Which two services must be enabled for this monitoring to occur? (Choose two.)
- A. iSCSI Target Service
- B. vSAN Performance Diagnostic Service
- C. vSAN Health Service
- D. vSAN File Services
- E. vSAN Performance Service
Answer: D,E
Explanation:
Explanation
To monitor the performance of vSAN File Services, the vSAN administrator must enable both the vSAN File Services and the vSAN Performance Service. The vSAN File Services provides SMB file shares to host clients, while the vSAN Performance Service collects and analyzes performance statistics and displays them in the vSphere Client. The other services are not related to vSAN File Services performance monitoring.
References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 9, Objective 7.4; [vSAN File Services];
[vSAN Performance Service]
NEW QUESTION # 16
The Resyncing Objects view in the vCenter UI reports that some objects are currently resyncing.
Which two actions would cause this situation? (Choose two.)
- A. HA Virtual Machine Monitoring forced a VM to reboot.
- B. VM snapshot is being deleted.
- C. A change to the storage policy is applied to the objects.
- D. DRS is relocatingVMs between vSAN nodes.
- E. A host failure occurs in the cluster
Answer: C,E
Explanation:
Explanation
Two actions that would cause some objects to be currently resyncing are:
A change to the storage policy is applied to the objects. This action triggers a resynchronization of objects to make them compliant with the new policy settings, such as FTT, RAID level, stripe width, etc. The resynchronization process copies data from one host to another to create or update replicas or parity segments.
A host failure occurs in the cluster. This action causes some objects to become non-compliant with their storage policy, as they lose one or more replicas or parity segments due to the host failure. The resynchronization process rebuilds the missing components on other hosts in the cluster to restore compliance and availability.References: : VMware vSphere Storage Guide, page 129 : Monitor the Resynchronization Tasks in the vSAN Cluster 1 : VMware vSAN Specialist v2 Exam Preparation Guide, page 13
NEW QUESTION # 17
A six-node vSAN ESA cluster contains multiple virtual machines, and a vSAN storage policy with the rule
"Failures to tolerate" set to "1 failure - RAID-5 (Erasure Coding)" is assigned. A vSAN administrator has changed the rule in the assigned policy to "2 failures - RAID-6 (Erasure Coding)".
What is the result of this change?
- A. The updated policy is serially applied to the virtual machines.
- B. No changes occur until the policy is reapplied.
- C. The changes are queued for 60 minutes.
- D. The policy change is rejected immediately.
Answer: A
Explanation:
Explanation
The updated policy is serially applied to the virtual machines is the correct answer because changing the rule in the assigned policy will trigger a policy compliance check and a resynchronization of the affected objects.
The policy change will not be rejected, queued, or ignored, as it is a valid and supported operation. However, the policy change will not be applied in parallel, as that would cause too much network and disk traffic.
Instead, the policy change will be applied one virtual machine at a time, starting with the most critical ones, until all virtual machines are compliant with the new policy. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 9
NEW QUESTION # 18
A customer wants to validate if Skyline online health is working for vSAN and finds out that Skyline is not fully configured yet.
What two requirements must be met to make sure that Skyline online health will work? (Choose two.)
- A. Have vCenter on version 7 or higher
- B. Have a working Internet connection
- C. Enable CEIP and join the program
- D. Add the Skyline license into Virtual Center
- E. Enable Skyline Health on the vSAN Cluster
Answer: B,C
Explanation:
Explanation
To make sure that Skyline online health will work for vSAN, two requirements must be met: enable CEIP and join the program, and have a working Internet connection. CEIP stands for Customer Experience Improvement Program, which is a voluntary program that collects anonymous product usage data from customers who participate in it. By enabling CEIP and joining the program, customers can benefit from Skyline online health, which provides proactivenotifications and recommendations for software and hardware issues based on VMware Analytics Cloud. A working Internet connection is also required for Skyline online health to communicate with VMware Analytics Cloud and receive online notifications. The other options are not requirements for Skyline online health. References: About the vSAN Skyline Health; Skyline Health
NEW QUESTION # 19
A vSAN administrator has an existing cluster where each ESXi host has the following:
Disk group #1 with one cache device and three capacity devices.
Disk group #2 with one cache device and two capacity devices.
What must the vSAN administrator do to expand disk group #2 to have three capacity devices?
- A. Add the new capacity device to the disk group and vSAN will automatically rebalance
- B. Create a new disk group with a single capacity device and then migrate the existing capacity devices
- C. Put the entire ESXi host in maintenance mode, evacuate all data, then add the new capacity device
- D. Put the disk group in maintenance mode, evacuate all data, then add the new capacity device
Answer: A
Explanation:
Explanation
To expand disk group #2 to have three capacity devices, the vSAN administrator should add the new capacity device to the disk group and vSAN will automatically rebalance. This action allows the administrator to increase the storage capacity of the disk group without disrupting any ongoing operations or evacuating any data. vSAN will automatically distribute data across all devices in the disk group to balance performance and utilization. The other options are not correct. Creating a new disk group with a single capacity device and then migrating the existing capacity devices is not necessary, as it would require more steps and resources than adding a device to an existing disk group. Putting the entire ESXi host or the disk group in maintenance mode and evacuating all data is not required, as it would cause downtime and data movement that could be avoided by adding a device to an existing disk group. References: Add Devices to the Disk Group; Expanding a vSAN Cluster
NEW QUESTION # 20
An administrator has been tasked with upgrading existing vSAN OSA cluster hosts with a SSD cache device per host to a NVMe device (hot plug).
Which fact should guide the administrator's action?
- A. The disk groupmust be deleted on each physical host in the vSAN OSA cluster to use the NVMe device.
- B. The cache disk drives must have a larger capacity.
- C. The host must be removed from vSAN OSA cluster before changingcache devices.
- D. The disk group does not need to be removed before adding new cache.
Answer: A
Explanation:
Explanation
The correct answer is A, the disk group must be deleted on each physical host in the vSAN OSA cluster to use the NVMe device. This is because vSAN OSA uses a disk group configuration where one disk is designated as a cache disk and the rest are capacity disks. To replace the cache disk with a different type or size, the disk group must be deleted first, which will erase all data on the disks and trigger a resynchronization of the affected objects. The administrator should put the host in maintenance mode and choose the option to evacuate all data before deleting the disk group. After replacing the cache disk with the NVMe device, the administrator should recreate the disk group and exit maintenance mode. The other options are incorrect for the following reasons:
B, the disk group does not need to be removed before adding new cache, is incorrect because adding a new cache disk to an existing disk group is not supported in vSAN OSA. The cache disk can only be replaced by deleting and recreating the disk group.
C, the host must be removed from vSAN OSA cluster before changing cache devices, is incorrect because removing the host from the cluster is not necessary and will cause more disruption and data loss than putting the host in maintenance mode. Removing the host will also delete its disk groups and require re-adding them after rejoining the cluster.
D, the cache disk drives must have a larger capacity, is incorrect because there is no requirement for the cache disk to have a larger capacity than the existing one. The cache disk size should be determined by the workload characteristics and performance requirements, not by the expansion process. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 10
NEW QUESTION # 21
A vSAN administrator was presented with 30 additional vSAN ReadyNodes to add to an existing vSAN cluster. There is only one administrator to complete this task.
What is the fastest approach?
- A. Run vim-cmd to capture, and apply the configuration from an existing host
- B. Clone the ESXi boot partition to all new hosts, since the hardware is identical
- C. Use a Host Profile that was extracted from an existing host
- D. Launch Quickstart to Add Hosts to a vSAN Cluster
Answer: C
Explanation:
Explanation
To add 30 additional vSAN ReadyNodes to an existing vSAN cluster with the fastest approach, the vSAN administrator should use a Host Profile that was extracted from an existing host. AHost Profile is a configuration template that captures the settings of a reference host and applies them to other hosts or clusters.
This way, the administrator can quickly and consistently configure multiple hosts with the same settings, such as network, storage, security, and services. The other options are not correct. Running vim-cmd to capture and apply the configuration from an existing host is not as fast or convenient as using a Host Profile, as it requires running commands on each host individually. Launching Quickstart to Add Hosts to a vSAN Cluster is not possible, as Quickstart is only available for new clusters or clusters that were configured through Quickstart.
Cloning the ESXi boot partition to all new hosts is not recommended, as it might cause conflicts or errors with the host identity, network settings, or licenses. References: Configuring Hosts Using Host Profile; Using Quickstart to Configure and Expand a vSAN Cluster
NEW QUESTION # 22
An administrator must choose between deploying a virtual witness or a physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.
What is a benefit of selecting this approach?
- A. Additional compute capacity for running VMs
- B. Shared metadata between separate clusters
- C. Increased vSAN datastore capacity
- D. Reduced vSphere licensing
Answer: D
Explanation:
Explanation
The correct answer is C, reduced vSphere licensing. This is because using a virtual witness appliance instead of a physical witness host can save on vSphere licensing costs, as the virtual witness appliance does not consume a vSphere license. The virtual witness appliance is a preconfigured virtual machine that runs ESXi and is distributed as an OVA file. It can be deployed on any ESXi host that has network connectivity to both data sites of the stretched cluster. The virtual witness appliance does not run any virtual machines other than itself and only hosts witness components of virtual machine objects. The other options are incorrect for the following reasons:
A, increased vSAN datastore capacity, is incorrect because using a virtual witness appliance does not affect the vSAN datastore capacity. The witness appliance does not store any customer data, only metadata, such as the size and UUID of vSAN object and components. The witness appliance also does not contribute any storage devices to the vSAN datastore.
B, shared metadata between separate clusters, is incorrect because using a virtual witness appliance does not enable sharing metadata between separate clusters. The witness appliance is dedicated to one stretched cluster and cannot serve as a witness for multiple clusters. The witness appliance maintains consistency between the two data sites of the stretched cluster by hosting witness components that act as tie-breakers in case of a site failure or network partition.
D, additional compute capacity for running VMs, is incorrect because using a virtual witness appliance does not provide additional compute capacity for running VMs. The witness appliance does not run any VMs other than itself and does not participate in any compute operations of the stretched cluster. The witness appliance only hosts witness components that consume minimal CPU and memory resources.
References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 11
Deploying a vSAN Witness Appliance
NEW QUESTION # 23
How often does the Skyline Health interval validate online if there are new Health Checks available for vSAN?
- A. Every 4 hours
- B. Every 24 hours
- C. Every 12 hours
- D. Every 1 hour
Answer: B
Explanation:
Explanation
The Skyline Health interval validates online if there are new Health Checks available for vSAN every 24 hours. This means that vSAN checks for new health checks from VMware Analytics Cloud once a day and updates the vSAN Health Service accordingly. The other options are not correct, as they do not match the actual frequency of the online validation. References: About the vSAN Skyline Health
NEW QUESTION # 24
A vSAN administrator of a non-internet connected vSAN environment wants to upgrade the environment from the vSAN 7.0 U3 to the vSAN 8.0 using vLCM.
Which option, if any, should be used as a depot in this case?
- A. It is not possible to use the vSphere Lifecycle Manager on a non-internet connected environment.
- B. Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.
- C. Configure the vSphere Lifecycle Manager to download the updates from an Online Depot.
- D. Configure the vSphere Lifecycle Manager to download the updates from the VMware Depot using HTTPS.
Answer: B
Explanation:
Explanation
To upgrade the vSAN environment from vSAN 7.0 U3 to vSAN 8.0 using vLCM in a non-internet connected environment, the administrator should configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository. UMDS stands for Update Manager Download Service, which is a component of vSphere Lifecycle Manager that can be used to download patches and updates for ESXi hosts, virtual appliances, and VMware Tools from the VMware online depot and store them in a shared repository. The administrator can then configure the vSphere Lifecycle Manager to use the UMDS-shared repository as a custom depot for patching and upgrading the vSAN cluster. This option allows the administrator to perform offline upgrades without requiring internet access for the vSAN cluster12 References: 1: VMware vSphere Lifecycle Manager Administration, page 22 2: VMware vSphere Update Manager Download Service, page 5
NEW QUESTION # 25
A vSAN administrator needs to enable vSAN ESA.
Which two requirements need to be met? (Choose two.)
- A. vSAN Advanced license
- B. vSAN Build Your Own configuration
- C. vSAN Standard license
- D. vSAN ReadyNodes configuration
- E. vSAN Witness Appliance
Answer: C,D
Explanation:
Explanation
To enable vSAN ESA, two requirements that need to be met are: vSAN Standard license or higher, and vSAN ReadyNodes configuration. vSAN Standard license or higher is required to use vSAN ESA, as it is a feature that is only available in vSAN 8.0 or later versions. vSAN ESA is an optional, alternative architecture to vSAN OSA that is designed to process and store data with higher efficiency, scalability, and performance.
vSAN ReadyNodes configuration is required to use vSAN ESA, as it is a hardware configuration that is pre-configured, tested, and certified for VMware Hyper-Converged Infrastructure Software. Each vSAN ReadyNode is optimally configured for vSAN ESA with the required amount of CPU, memory, network, and storage NVMe devices. The other options are not correct. vSAN Build Your Own configuration is not supported for vSAN ESA, as it might not meet the hardware requirements or compatibility for vSAN ESA.
vSAN Witness Appliance is not required to use vSAN ESA, as it is only needed for stretched cluster or two-node cluster configurations. References: vSAN Express Storage Architecture; vSAN ReadyNode Hardware Guidance
NEW QUESTION # 26
After a server power failure, the administrator noticed the scheduled resyncing in the cluster monitor displays objects to be resynchronized under the pending category.
Why are there objects in this category?
- A. There are too many objects to be synchronized.
- B. Object resynchronization must be started manually.
- C. The delay timer has not expired.
- D. These objects belong to virtual machines, which are powered off.
Answer: C
Explanation:
Explanation
The reason why there are objects in the pending category of the scheduled resyncing in the cluster monitor is that the delay timer has not expired. The delay timer is a configurable setting that determines how long vSAN waits before repairing a non-compliant object after placing a host in a failed state or maintenance mode. The default value is 60 minutes, but it can be changed in the vSAN Services configuration. The pending category displays the objects with the expired delay timer that cannot be resynchronized due to insufficient resources in the current cluster or the vSAN FTT policy set on the cluster not being met. The other options are not correct.
These objects do not belong to virtual machines that are powered off, as vSAN resynchronizes all objects regardless of their power state. Object resynchronization does not need to be started manually, as vSAN initiates it automatically when the delay timer expires. There are not too many objects to be synchronized, as vSAN can handle multiple resynchronization tasks in parallel. References: Monitor the Resynchronization Tasks in the vSAN Cluster; About vSAN Cluster Resynchronization
NEW QUESTION # 27
A customer wishes to host a new range of applications with high-performance requirements, specifically, low latency. The current vSAN platform is based on ReadyNode hardware and uses a vSAN 7.0 U2 hybrid topology configuration.
Which would satisfy the customer's requirement?
- A. Deploy the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4
- B. Deploy the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration
- C. Perform an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA
- D. Deploy the application on a new cluster with vSAN 8.0 ESA using a new hardware design
Answer: D
Explanation:
Explanation
Deploying the application on a new cluster with vSAN 8.0 ESA using a new hardware design is the correct answer because it will satisfy the customer's requirement for low latency. vSAN 8.0 ESA is a new architecture that uses a storage pool configuration where all disks are treated as capacity disks and use a new algorithm to distribute data across them. This improves the I/O flow, reduces the write amplification, and eliminates the cache tier bottleneck. Using a new hardware design with all-flash disks or NVMe disks will further enhance the performance and latency of the application, as these disks have faster read and write speeds than hybrid disks. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additionalstripe width of 4, deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration, and performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA are not valid or optimal solutions for this scenario. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4 will increase the resiliency and availability of the data, but it will also increase the network traffic, disk space consumption, and parity calculation overhead, which will negatively affect the latency and performance of the application. Deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration will not improve the latency significantly, as vSAN 8.0 OSA still uses the same disk group configuration as vSAN 7.0 U2 OSA, where one disk is designated as a cache disk and the rest are capacity disks. The cache disk can still become a bottleneck for high-performance applications, especially if it is not an SSD or NVMe disk. Performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA is not possible, as vSAN ESA requires a different hardware design than vSAN OSA. The existing disk groups need to be deleted and all disks need to be erased before switching to vSAN ESA. References:
[VMware vSAN Specialist v2 Exam Preparation Guide], page 6
What's New in VMware vSAN 8.0
NEW QUESTION # 28
After reviewing various performance charts at a cluster level, an administrator found an individual VM impacting overall performance of the vSAN cluster.
What feature should be used to introspect multiple performance metrics of a single virtual machine?
- A. I/O Trip Analyzer
- B. esxci
- C. llOlnsiqht
- D. Skyline Health
Answer: A
Explanation:
Explanation
To introspect multiple performance metrics of a single virtual machine, such as latency, throughput, IOPS, and congestion, the feature that should be used is I/O Trip Analyzer. This feature allows the administrator to diagnose the virtual machine I/O latency issues by providing a breakdown of the latencies at each layer of the vSAN stack, such as VM, host, network, and disk group. The other options are not correct, as they do not provide multiple performance metrics of a single virtual machine. esxcli is a command-line tool that can be used to manage various aspects of ESXi hosts, but it does not provide detailed performance analysis of virtual machines. Skyline Health is a feature that provides proactive notifications and recommendations for software and hardware issues based on VMware Analytics Cloud, but it does not provide granular performance metrics of virtual machines. llOlnsiqht is not a valid feature name in vSAN. References: Use I/O Trip Analyzer; Monitoring vSAN Performance
NEW QUESTION # 29
A vSAN administrator is investigating vSAN performance related problems but cannot find any vSAN performance statistics on the cluster summary page.
Why is this situation occurring?
- A. vSAN performance statistics are only available via CLI.
- B. The vRealize Operations Manager is not integrated with vSAN cluster.
- C. The administrator has read-only permissions on the cluster level.
- D. vSAN performance service is not enabled.
Answer: D
Explanation:
Explanation
The reason why the vSAN administrator cannot find any vSAN performance statistics on the cluster summary page is that the vSAN performance service is not enabled. The vSAN performance service is a feature that collects and analyzes performance metrics and displays them in graphical charts in vCenter. The vSAN performance service must be turned on manually for each vSAN cluster, as it is not enabled by default. The other options are not correct. The integration of vRealize Operations Manager with the vSAN cluster is not required to view vSAN performance statistics, as they are available in vCenter. The administrator's permissions on the cluster level do not affect the visibility of vSAN performance statistics, as they are accessible to any user who can view the cluster. vSAN performance statistics are not only available via CLI, as they can also be viewed in vCenter using the vSAN performance service. References: About the vSAN Performance Service; Enable or Disable the Performance Service
NEW QUESTION # 30
An administrator wants to assign a storage policy to a workload on a two-node vSAN OSA cluster consisting of three disk groups each with nested fault domains. The virtual machine must be protected against a disk or disk group failure.
Which two storage policies meet these requirements? (Choose two.)
- A. RAID-6/FTT 2
- B. RAID-5/FTT 1
- C. RAID-1/FTT 3
- D. RAID-1/FTT 1
- E. RAID-5/FTT 2
Answer: A,D
Explanation:
Explanation
To protect a virtual machine against a disk or disk group failure, the storage policy must have a failure tolerance method (FTM) of RAID-1 or RAID-6 and a failure to tolerate (FTT) value of at least 1. RAID-1 mirrors the data across multiple disk groups, while RAID-6 uses erasure coding to stripe the data and parity information across multiple disk groups. RAID-5 is not suitable for this scenario, as it can only tolerate one disk failure per stripe. FTT 2 or 3 would require more disk groups than available in the cluster.
Therefore, the correct options are C and E. References: 1, page 8; 2, section 3.1
NEW QUESTION # 31
......
Valid 5V0-22.23 Exam Updates - 2026 Study Guide: https://www.vceengine.com/5V0-22.23-vce-test-engine.html
Top VMware 5V0-22.23 Exam Audio Study Guide! Practice Questions Edition: https://drive.google.com/open?id=1mVRDQFAqHZFZ23l-Hyy6oG0G2tdkuPuS
