[Apr 30, 2024] MB-320 Exam Dumps PDF Updated Dump from VCEEngine Guaranteed Success
Pass Your Microsoft Exam with MB-320 Exam Dumps
Study Guides for Exam MB-320
The study books explored below will aid in a big way during the revision for the Microsoft MB-320 test:
- Exam MB-320: Microsoft Dynamics 365 for Finance & Operations, Manufacturing
This MB-320 test revision book by Murray Fife includes content for exam prep such as exercises for practice, walkthroughs, as well as sample questions that are based on the training courses that Microsoft recommends for the official exam. In addition, it includes varied modules that cover the needed exam sections so that one gets to the point of complete preparation.
- Master Planning in Manufacturing using Microsoft Dynamics 365 for Operations
This book can be the best in guiding you about the issue of manufacturing with regards to Microsoft Dynamics 365. The guide by Scott Hamilton explores master planning for coordination of SCM (Supply Chain Management) in business for manufacturing. Also, it investigates the necessary capabilities concerning master planning in addition to extra considerations for varying functional areas as well as varying manufacturing types. Particularly, the guide aims at SCM professionals who require to understand the capabilities of master planning that are directed to running manufacturing businesses, and wish to get a deep awareness of how best they can employ standard functionality. More so, such a manual is ideally vital when learning about the issues surrounding master planning within manufacturing. This makes it a good reference material as one prepares for MB-320 test.
NEW QUESTION # 10
You are the production supervisor in charge of setting effective cost prices for the labor force in a manufacturing company.
It is the end of the year and the labor rates have been recalculated based on new salary data.
You need to update the effective labor costs for all labor groups.
Which element must be updated?
- A. cost groups
- B. cost category
- C. resource group
- D. shared category
- E. production orders
Answer: B
NEW QUESTION # 11
You are the product definition manager for a car manufacturing company. You set up and maintain the production configuration models used at the company.
You must build a new configuration model and include constraints in the model.
You need to determine which constraint type to use for each scenario.
Which constraint type should you use? To answer, drag the appropriate constraint types to the correct scenarios. Each constraint type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 12
A manufacturing company is implementing Dynamics 365 for Finance and Operations. The company uses a standard costing model to value inventory.
During the setup of the system, all areas that impact the standard cost of the item must be configured correctly to calculate a complete standard cost by using routing, Bill of materials (BOM) and overhead burden.
You need to verify that all areas of the system are correctly configured.
Which object does NOT impact the standard cost of manufactured items?
- A. cost groups
- B. BOM formula
- C. item group
- D. cost categories
Answer: B
Explanation:
Section: Set up and configure manufacturing
Explanation/Reference:
NEW QUESTION # 13
A pharmaceutical manufacturer uses Process manufacturing.
You are consolidating planned batch orders for a specific medication. The order must cover two weeks of demand. No other items need to be consolidated.
You need to change the coverage group of the items.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
NEW QUESTION # 14
A company that produces rubber hose using Discreet orders accounts for raw material scrap after report as finished though inventory movement journals.
The company has noticed that most of the scrap that is recorded is due to start up that feeds the hose to the finishing process. In addition, the amount of scrap that is recorded is consistent regardless of the amount of hose being produced.
You need to account for material lost during startup.
What should you do?
- A. Enter the amount of scrap that is consumed as variable scrap in the Bill of materials.
- B. Enter the amount of scrap that is consumed as constant scrap in the Bill of materials.
- C. Do a case study for the scrap items and enter the average amount of scrap as a separate line items on the Bill of materials.
- D. Enter the consumption amount on the line to match the actual amount used.
Answer: A
NEW QUESTION # 15
You have a product that can be manufactured on two different production lines in the same warehouse. You create resources and then create individual input locations for the resources. You create two routes. Each route uses different resources.
Materials are staged for consumption in different locations based on the resources being utilized for production.
You need to set up the formula to consume the goods from the correct line-side location.
What should you do?
- A. Select the plan group and consumption operation for each line.
- B. Select resource consumption and the operation for each line.
- C. Specify a site in the formula header.
- D. Select a warehouse and consumption operation for each line.
Answer: B
NEW QUESTION # 16
You need to modify the production order defaults for the manufacturing execution production order Start process.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 17
A company uses Process manufacturing.
You need to review formulas and how the different ingredient types impact the batch balancing process.
Which ingredient types should you use? To answer, drag the appropriate ingredient types to the correct scenarios. Each ingredient may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/batch-balancing
NEW QUESTION # 18
A company makes lubricants and greases used in the automotive industry. The company plans to implement Dynamics 365 for Finance and Operations. The system must meet the following requirements:
* Schedule the batch production of products.
* Plan for inventory fluctuations of ingredients that are used across different products.
* Schedule delivery of amounts of proprietary compounds used during production from vendors to keep production runs on schedule and eliminating excess stock on hand or delayed production.
The company is starting the initial setup of their Dynamics 365 environment.
Answer:
Explanation:
Explanation
NEW QUESTION # 19
A company that uses discreet manufacturing concepts to produce solar panels has a temporary change of glass supplier. The substitute glass will only be used for three months. The company also uses Bill of materials (BOM) version to track changes of the raw materials.
Managers are manually adjusting the production picking lists to reflect the alternate glass that is being temporarily used. The time spent doing manual adjustments to production picking lists has become a burden.
You need to create a new BOM with the alternate glass and include a from and to date on the BOM version.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
NEW QUESTION # 20
A company manufactures high-end speaker systems. You have different configurations available for customers to customize features including finishes and speaker materials. You have a product configuration model with bill of material lines and conditions for each component.
A customer can optionally add on protective covers, but only if a non-metal material is selected. If any other material is selected, the covers cannot be added. You add the following attributes:
You need to create an expression-based constraint that will only allow Corner Protection if Metal is not selected.
How should you complete the expression? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 21
You are a manufacturing consultant helping a client test out different bill of material (BOM) and route consumption options when starting production orders. Material and labor consumption are to be completed before Report as finish.
You are running a production order with BOM lines that have a Flushing principle set to Start. The Automatic Route Consumption Runtime has been set to Yes.
You have set up the default Start user options for all production orders as shown in the exhibit below.
Answer:
Explanation:
NEW QUESTION # 22
A manufacturing company uses license plates for inventory tracking of all materials. Part M92020 is stored with 30 units for each license plate. You create a production order that indicates one unit of part M9202 and release the order for picking. There is no inventory currently available in the production input location.
The warehouse fast-tab setup for part M92020 is shown below.
Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 23
You need to resolve the production manager issue.
How should you configure manufacturing execution? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-production-parameters-in-manufacturing-execution
NEW QUESTION # 24
You need to configure each item for plastic manufacturing.
Which production types should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 25
A company uses Lean manufacturing concepts to produce paper plates redesigned the layout of the warehouse and production floor.
The company's production flow activities no longer match the tasks of the workers Employees use paper and manual communication to complete the tasks.
You need to update the production flows to match their current processes by deactivating the obsolete production flows and creating new ones.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 26
You need to configure the system for plastic operations.
Which two parts should be manually reported as finished? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. machined plastic pieces
- B. unmachined plastic pieces
- C. mold tooling
- D. excess plastic
Answer: A,B
Explanation:
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
NEW QUESTION # 27
A bakery is implementing process manufacturing in Dynamics 365 Supply Chain Management. Sugar is the most widely used ingredient in the bakery items, which are baked and sold fresh daily.
The purchase price of sugar is based on the market at a point in time and is agreed upon monthly with the vendor who supplies the sugar.
The monthly changes in cost create fluctuations in the required sales margin on bakery items. The bakery requires visibility into the cost changes over time for auditing. The bakery also requires visibility into the formula cost breakdown, which is currently tracked in a spreadsheet.
You need to configure the commodity pricing.
What should you configure for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 28
......
The Microsoft MB-320 exam covers a wide range of topics, including master planning, production control, warehouse management, quality management, and more. Candidates are required to demonstrate their understanding of the various features and functionalities of Microsoft Dynamics 365, including how to configure and use the system. They must also be able to apply this knowledge to real-world scenarios, such as managing inventory, analyzing supply chain data, and optimizing production processes.
Microsoft MB-320 (Microsoft Dynamics 365 Supply Chain Management, Manufacturing) Exam is a certification exam that tests your knowledge and skills in supply chain management and manufacturing using the Microsoft Dynamics 365 platform. MB-320 exam is designed for professionals who want to demonstrate their expertise in the end-to-end supply chain management process, including planning, production, inventory management, logistics, and quality control.
New Real MB-320 Exam Dumps Questions: https://www.vceengine.com/MB-320-vce-test-engine.html
MB-320 Exam Dumps - Microsoft Practice Test Questions: https://drive.google.com/open?id=12LbLfuO4_AYGmVZQXf8-SWF75HWWKIf6
