[Feb 12, 2022] Latest 1Z0-996-20 PDF Dumps & Real Tests Free Updated Today
1Z0-996-20 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
NEW QUESTION 24
Your client has the following requirements:
Many customers are installing their own solar electrical generation equipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.
In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid. Both reads will be stored in kWh, but the import is subtractive and export is consumptive.
What solution should you choose to configure the measuring component types for these specific requirements?
- A. Create two new measuring component types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.
- B. Create two service points: one for subtractive import and the other for consumptive export.
- C. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.
- D. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).
Answer: A
NEW QUESTION 25
What contains the details of how a bill was calculated and how it will be printed on a bill?
- A. Bill Segments
- B. Calculation Rules
- C. Bill
- D. Service Agreement
- E. Rate Schedule
Answer: A
NEW QUESTION 26
Your client has three requirements:
1. Apply validations on meter reads coming from the Data Collectors.
2. If a meter read does not pass the validation, an error will be generated and assigned to a user.
3. Retry the validation every 30 minutes for the errors in case the issue is related to configuration.
Which statement describes the base functions you should use?
- A. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).
- B. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.
- C. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)
- D. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)
- E. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.
Answer: C
NEW QUESTION 27
When creating a new business object for a service point (SP), what items are required to be able to view and update the new elements associated with the SP?
- A. Maintenance Object, Application Service, and Schema
- B. Validation Algorithm, Post Processing Algorithm, and Lifecycle
- C. Display UI Map, Display Map Service Script, and Maintenance UI Map
- D. Schema, Validation Algorithm, and Maintenance UI Map
Answer: A
NEW QUESTION 28
How many derived values can a final measurement have in addition to the primary measured value?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 29
What determines an Account's Balance?
- A. the sum of all the Financial Transactions linked directly to the service agreements related to the account
- B. the sum of all the balances recorded in the "Balance Due" field on each service agreement related to the account
- C. the logic defined in a plug-in spot on the Installations Option
- D. the amount recorded in the "Balance Due" field on an account
- E. the sum of all the Financial Transactions linked directly to the account
Answer: E
NEW QUESTION 30
In addition to sets of procedures, and careful handling instructions for hazardous or delicate materials, what can Specifications include to provide information about assets or other entities?
- A. Attributes
- B. Conditions
- C. Rules
- D. Specifications
Answer: D
NEW QUESTION 31
Approval Profiles control which aspects of an Adjustment?
- A. whether the adjustment should appear on the customer's next bill
- B. if an adjustment requires approval before it's frozen
- C. whether current and/or payoff balance are affected by the adjustment
- D. information defaulted on an Adjustment
- E. control how adjustments are approved
Answer: C
Explanation:
Reference:
%20Adjustment%20Approval.pdf
NEW QUESTION 32
Which business object performs critical validations whenever initial measurements are loaded?
- A. D1-IMDSeeder
- B. D1-IMDRetry
- C. D1-GenericIMDMain
- D. D1-IMDPeriod
- E. D1-IMDPreVEE
Answer: A
NEW QUESTION 33
What Service Order activity types does the application include?
- A. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
- B. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
- C. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
- D. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service
Answer: D
NEW QUESTION 34
Which two are "Are SP and Device Ready?" state algorithms for Enable Service? (Choose two.)
- A. Start Service Agreement
- B. Create Service Point
- C. Check for Measurement
- D. Customer Device Compatibility Check
- E. Create Usage Subscription
Answer: C,D
NEW QUESTION 35
At what stage in the initial measurement data (IMD) import process will the application of meter multipliers be performed?
- A. Critical Validation
- B. post-VEE
- C. Prepare for VEE
- D. VEE
Answer: A
NEW QUESTION 36
Which three are important Account concepts that must always be followed? (Choose three.)
- A. Bills are produced for an account and are sent to the account persons.
- B. An Account references one or more persons.
- C. Accounts expire when there are no active contracts.
- D. An Account can only reference one and only one person at one time.
- E. Every Account has a unique, system-assigned Account ID.
Answer: A,D,E
NEW QUESTION 37
Usage transactions can contain date breaks. Which is used to supply date breaks?
- A. the Usage Subscription Type
- B. the Deferred Monitor Calculation Algorithm
- C. the requesting system or user input
- D. the Usage Subscription BO
Answer: A
NEW QUESTION 38
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?
- A. Device Type and Measuring Component Type
- B. Measuring Component Type
- C. Usage Type
- D. Device Type
- E. Device Configuration Type
Answer: E
NEW QUESTION 39
Which configuration steps are required to derive loss-adjusted kWh on a measuring component based on a loss factor value related to a service point?
- A. Configure an SQI and the derivation algorithm, and then associate the algorithm to the Measuring Component Type and SQI to the service point.
- B. Configure a factor and derivation algorithm, and then associate the factor to the Measuring Component Type and the derivation algorithm to the service point.
- C. Configure a Service Point Characteristic Type and derivation algorithm, and then associate the algorithm to the Measuring Component Type and the characteristic value to the service point.
- D. Configure a Service Point Characteristic Type, factor, derivation algorithm, and Service Quantity Identifier (SQI), and then associate the SQI and derivation algorithm to the Measuring Component Type and the characteristic value to the service point.
- E. Configure a factor and derivation algorithm, and then associate both to the Measuring Component Type and service point.
Answer: A
NEW QUESTION 40
A Service Order Orchestrator determines the steps required to complete the service.
As an example, based on the state of the service point, what does the Enable Service Orchestrator determine the actions for?
- A. Create a Service Point; Install a Device; Turn on the Device
- B. Connect the Service Point; Install a Device; Create a Usage Subscription
- C. Connect the Service Point; Install a Device; Turn on the Device
- D. Create a Device Configuration; Install a Device; Turn on the Device
Answer: A
NEW QUESTION 41
A device has one or more measuring components that measure consumption, demand, or other values.
Which lists two attributes of a measuring component?
- A. Manufacturer and Model
- B. Serial Number and Badge Number
- C. Channel ID and Badge Number
- D. Channel Multiplier and Channel ID
- E. Model and Serial Number
Answer: B
NEW QUESTION 42
How many bill segment-related financial transactions do pay plans have?
- A. depends on the number of payments that is part of the pay plan
- B. none
- C. depends on the number of bills that will contain the customer's pay plan commitments
- D. unlimited
- E. one
Answer: C
NEW QUESTION 43
How should you configure the derived values that are relevant for a device?
- A. Configure the derived values on the Final Measurement Type for the measuring components to be defined on the device.
- B. Configure the derived values on the Measuring Component Type for the measuring components to be defined on the device.
- C. Configure the derived values on the Measuring Component for the measuring components to be defined on the device.
- D. Configure the derived values on the Device Type for the derived values to be defined on the device.
Answer: A
NEW QUESTION 44
How do you ensure that specific Validation, Editing, and Estimation (VEE) rules are applied to estimated measurements?
- A. by adding the VEE Group to the Device Type
- B. by adding the estimation rules to the Manual Override VEE Group to the Measuring Component Type
- C. by adding the VEE Group to the Device Configuration Type
- D. by adding the VEE Group as the Fallback VEE Group for the appropriate VEE role
Answer: B
NEW QUESTION 45
......
How to Prepare Oracle 1Z0-996-20: Oracle Utilities Customer Cloud Service 2020 Implementation Essentials Exam
Preparation Guide Oracle 1Z0-996-20: Oracle Utilities Customer Cloud Service 2020 Implementation Essentials Exam
Introduction
The 2019 Implementation Essentials Certification Exam of Oracle Services Customer Cloud Service certifies that the applicant understands Oracle Services Customer Cloud technologies. The Oracle 1z0-996 Exam is also called this credential and it is a benchmark for employees worldwide recognized experience and skills. Oracle is a global US information technology corporation with headquarters in California. Oracle is a global organisation developing enterprise tech apps. Oracle offers a range of cloud technologies and platforms as well as hardware and resources that help businesses grow their operations. Data management, business analytics, IT operations management, enterprise resource planning, security, and emerging technologies are the focus of Oracle’s applications. Oracle is best known for its cloud software and technology. Oracle Cloud, a relational Database Management System (DBMS), is one of the most popular corporate database products. Oracle also designs and installs software and solutions for middle-stage information management systems, CRM systems (HCM), enterprise resource planning systems (ERP), and supply chain management systems (SCM). A Multi Model Database Management System is the Oracle Database Foundation, widely known as Oracle Database Management System (DBMS). It is a commonly used database to carry out database analysis and data storage functions. Oracle Database is available on server, premises or a mixed cloud system through a variety of service providers. This exam guide gives a brief introduction to the topics of 1z0-996-20 practice exams and 1z0-996-20 dumps.
2022 Valid 1Z0-996-20 test answers & Oracle Exam PDF: https://www.vceengine.com/1Z0-996-20-vce-test-engine.html
