Get C-SACS-2308 Braindumps & C-SACS-2308 Real Exam Questions
SAP C-SACS-2308 Actual Questions and Braindumps
NEW QUESTION # 13
Which element is NOT available in the Optimized Design Experience?
- A. Grid page
- B. Data Analyzer
- C. Responsive page
- D. Time Series chart
Answer: A
NEW QUESTION # 14
What term refers to dimension members with no numeric data values associated with them?
- A. Booked
- B. Transformed
- C. Unbooked
- D. Exception aggregation
Answer: C
NEW QUESTION # 15
When you are adding a calculation to a table (see graphic below) and choose Single, to which of the following is the new column added?
- A. Every dimension member
- B. Story repository
- C. Selected dimension member
- D. @Data model
Answer: C
Explanation:
When you are adding a calculation to a table, you can choose from two options: Single or Multiple. The option determines how many new columns are added to the table based on the calculation. The options are:
Single: Adds one new column to the table with the calculation result for the selected dimension member. For example, if you select Soft Drinks and choose Single, you will get one new column with the calculation result for Soft Drinks only.
Multiple: Adds multiple new columns to the table with the calculation result for each dimension member. For example, if you select Soft Drinks and choose Multiple, you will get three new columns with the calculation result for Soft Drinks, Juice, and Alcohol.
Therefore, the correct answer is Selected dimension member, as it is the option that the new column is added to when you choose Single. Verified Reference:: Create Calculations in Tables
NEW QUESTION # 16
Which of the following are necessary for Linked Analysis?
- A. Multiple pages
- B. Multiple widgets
- C. Multiple stories
- D. Multiple data models
Answer: B
Explanation:
Linked Analysis is a feature that allows you to link multiple widgets in a story based on the same model. You can use Linked Analysis to do the following:
Filter data in multiple widgets by selecting a data point in one widget. For example, if you select Soft Drinks in a chart, all the other linked widgets will show data for Soft Drinks only.
Drill down or up in multiple widgets by changing the level of detail in one widget. For example, if you drill down from Product Category to Product Name in a table, all the other linked widgets will show data for Product Name as well.
Highlight data in multiple widgets by hovering over a data point in one widget. For example, if you hover over Germany in a geo map, all the other linked widgets will highlight the data for Germany.
To use Linked Analysis, you need to have the following:
Multiple widgets based on the same model. You can link any type of widget, such as charts, tables, geo maps, etc., as long as they are based on the same model.
A common dimension or measure between the widgets. You can link widgets based on any dimension or measure that they share in common.
You do not need to have the following for Linked Analysis:
Multiple stories. You can use Linked Analysis within the same story. You cannot link widgets across different stories.
Multiple data models. You can use Linked Analysis with one model only. You cannot link widgets based on different models.
Multiple pages. You can use Linked Analysis within the same page. You cannot link widgets across different pages.
Therefore, the correct answer is Multiple widgets, as it is the necessary element for Linked Analysis. Verified Reference:: Link Widgets with Linked Analysis
NEW QUESTION # 17
Which link types can you use to blend data in a story? Note: There are 3 correct answers to this question.
- A. Intersecting data only
- B. Inner data
- C. All primary data
- D. All data
- E. Outer data
Answer: A,C,D
Explanation:
The correct answers are
A) Intersecting data only, D. All primary data, and E. All data. These are the three link types that you can use to blend data in a story, according to the SAP Learning course on Blending Data in Models1. The link type determines how the dimension data from the primary and secondary models are displayed in the blended chart or table
NEW QUESTION # 18
What can you do in the SAP Analytics Cloud mobile app? Note: There are 2 correct answers to this question.
- A. Create a story
- B. Create a dataset
- C. Collaborate with colleagues
- D. Share Links
Answer: A,C
NEW QUESTION # 19
What is a unique quality of viewing stories on a mobile device?
- A. Stories rotate their orientation as you rotate the device.
- B. Stories render only in landscape mode for phones.
- C. Stories render only in portrait mode for tablets.
- D. Stories do not rotate their orientation.
Answer: D
Explanation:
According to the SAP Help Portal1, stories can be viewed only in portrait mode for phones and landscape mode for tablets; the stories do not rotate their orientation. This is a unique quality of viewing stories on a mobile device, as opposed to viewing them on a computer browser, where the stories can be rotated and resized according to the screen dimensions. Therefore, it is important to design stories for mobile devices using the Responsive page and the Device Preview Bar in SAP Analytics Cloud Story Design.
NEW QUESTION # 20
Which Filter options are supported in the Optimized Design Experience? Note: There are 3 correct answers to this question.
- A. Section
- B. Controls
- C. Advanced
- D. Cascading
- E. Input Control
Answer: A,D,E
Explanation:
The Optimized Design Experience is a new design option for creating stories in SAP Analytics Cloud. It offers several usability improvements and performance enhancements compared to the Classic Design Experience. However, it also has some limitations and differences, such as the unavailability of some elements that are present in the Classic Design Experience1.
The following filter options are supported in the Optimized Design Experience:
Input Control: This option allows you to add interactive filters to a story page that allow the story viewers to filter data, compare figures, and explore relationships directly from the page. You can use the Input Controls tool in the Tools section to select dimensions or measures that you want to use as input controls2.
Cascading: This option allows you to create a hierarchy of input controls that depend on each other. You can use this option to filter data based on multiple levels of a dimension, such as Country, Region, and City. You can also use this option to filter data based on different dimensions that are related, such as Product Category and Product Name3.
Section: This option is not a filter option, but a way of organizing a story into different parts based on a dimension. A section creates a separate page for each member of the dimension, and displays the same widgets on each page with the data filtered by the section dimension. Sections are available in both the Optimized and Classic Design Experiences4.
The other options are not supported in the Optimized Design Experience, because:
Advanced: This option allows you to create complex filters using logical operators, such as AND, OR, and NOT. You can use this option to filter data based on multiple conditions or expressions, such as Revenue > 1000 AND Profit Margin < 10%. Advanced filters are available only in the Classic Design Experience.
Controls: This option is not a valid filter option in SAP Analytics Cloud. It may refer to input controls, which are supported, or chart controls, which are not supported. Chart controls are buttons that allow you to change the chart type, switch between absolute and relative values, or drill up and down in a hierarchy. Chart controls are available only in the Classic Design Experience.
Reference:
1: Choosing Between Optimized and Classic Design Modes - SAP Learning 2: Using Input Controls - SAP Learning 3: Creating Cascading Input Controls - SAP Learning 4: Creating Sections - SAP Learning : [Advanced Filters - SAP Learning] : [Chart Controls - SAP Learning]
NEW QUESTION # 21
How does the SAP Digital Boardroom support engaging with a remote audience? Note: There are 2 correct answers to this question.
- A. Through annotations
- B. Through Data Analyzer
- C. Through screen sharing
- D. Through story editing
Answer: A,C
NEW QUESTION # 22
Which calculation types support Input controls? Note: There are 3 correct answers to this question.
- A. Aggregation
- B. Calculated measure
- C. Dimension to measure
- D. Difference From
- E. Restricted Measure
Answer: B,D,E
NEW QUESTION # 23
Which of the following is a story guideline?
- A. Avoid chart filters with many data points.
- B. Avoid the Top N feature in charts and tables.
- C. Design many stories with few pages.
- D. Design few stories with many pages.
Answer: A
NEW QUESTION # 24
Which story page types are imported into the SAP Digital Boardroom builder?
- A. Canvas and grid
- B. Responsive and canvas
- C. Responsive and grid
Answer: B
NEW QUESTION # 25
Which design options are available when you create a new story? Note: There are 2 correct answers to this question.
- A. CSS
- B. Optimized
- C. Classic
- D. Style
Answer: B,C
NEW QUESTION # 26
How does the SAP Digital Boardroom support engaging with a remote audience? Note: There are 2 correct answers to this question.
- A. Through annotations
- B. Through Data Analyzer
- C. Through screen sharing
- D. Through story editing
Answer: A,C
Explanation:
The SAP Digital Boardroom supports engaging with a remote audience through annotations and screen sharing. Annotations allow users to highlight or draw on the screen using different colors and shapes, which can help to emphasize key points or explain complex concepts. Screen sharing allows users to share their screen with other participants who join the digital boardroom session via a web browser, which can help to facilitate collaboration and communication. Data Analyzer and story editing are not features that support engaging with a remote audience; they are features that allow users to analyze data or modify stories in the digital boardroom. Verified Reference: [SAP Analytics Cloud - Digital Boardroom]
NEW QUESTION # 27
What are valid targets for hyperlinks?Note: There are 3 correct answers to this question.
- A. SAP Analysis for Microsoft Office workbook
- B. SAP Analytics Cloud story
- C. SAP Analytics Cloud story page
- D. External website
- E. SAP BusinessObjects Web Intelligence document
Answer: B,C,D
Explanation:
The valid targets for hyperlinks are external websites, SAP Analytics Cloud stories, and SAP Analytics Cloud story pages. External websites are web pages that are outside of SAP Analytics Cloud, such as https://www.sap.com. SAP Analytics Cloud stories are presentation-style documents that use charts, visualizations, text, images, and pictograms to describe dat a. SAP Analytics Cloud story pages are individual pages within a story that contain one or more widgets. SAP BusinessObjects Web Intelligence documents and SAP Analysis for Microsoft Office workbooks are not valid targets for hyperlinks; they are different types of documents that are not supported by SAP Analytics Cloud. Verified Reference: [SAP Analytics Cloud - Hyperlinks]
NEW QUESTION # 28
To which of the following can you add a section?
- A. Canvas page
- B. Table
- C. Chart
- D. Digital Boardroom
Answer: A
NEW QUESTION # 29
Which story page types are imported into the SAP Digital Boardroom builder?
- A. Canvas and grid
- B. Responsive and canvas
- C. Responsive and grid
Answer: B
Explanation:
The story page types that are imported into the SAP Digital Boardroom builder are responsive and canvas. Responsive pages are designed to adapt to different screen sizes and orientations, making them suitable for different devices and scenarios in the digital boardroom. Canvas pages are designed for desktop browsers and fixed layouts, making them suitable for large screens and presentations in the digital boardroom. Grid pages are not imported into the digital boardroom builder; they are designed for tabular data analysis and printing. Verified Reference: [SAP Analytics Cloud - Digital Boardroom]
NEW QUESTION # 30
What story option can help you create a story as a launchpad to other stories?
- A. Linked Analysis
- B. Hyperlink
- C. RSS Feed
- D. Input control
Answer: B
NEW QUESTION # 31
Which of the following can you use to change the formatting of a table in the Styling panel? Note: There are 2 correct answers to this question.
- A. Styling rules
- B. Table template
- C. Thresholds
- D. In-Cell Charts
Answer: A,B
Explanation:
You can use table templates and styling rules to change the formatting of a table in the Styling panel. Table templates allow you to apply predefined formats to tables, such as alternating row colors, grid lines, and font sizes. Styling rules allow you to apply conditional formatting to tables, such as changing the background color, font color, or icon based on certain criteri a. In-cell charts and thresholds are not available in the Styling panel; they are options that can be enabled or disabled in the Builder panel. Verified Reference: [SAP Analytics Cloud - Table Formatting]
NEW QUESTION # 32
When you save a story as a template, what happens?
- A. Custom widgets are removed.
- B. Custom formatting is retained.
- C. All data is removed.
- D. Standard widgets remain intact.
Answer: C
Explanation:
When you save a story as a template, you can use it as a starting point for creating new stories with the same layout and formatting. However, all the data from the original story is removed and replaced by placeholders for charts, tables, maps, input controls, and value driver trees. This way, you can easily add new data sources and models to the template without affecting the existing ones1. Custom formatting, such as story background, chart color palettes, fonts, and borders, is retained in the template2. Custom widgets, such as images, shapes, texts, and buttons, are also preserved in the template3. Standard widgets, such as charts, tables, maps, input controls, and value driver trees, are converted into empty placeholders that can be filled with new data3.
Reference:
1: Create and Use Story Templates 2: Story Templates in SAP Analytics Cloud 3: Building Stories from a Template
NEW QUESTION # 33
What does the model setting Optimize Story Building Performance do in a story?
- A. It prevents the automatic refresh of data during story design.
- B. It disables the Classic Design Experience,
- C. It forces the story to be designed in the Optimized Design Experience.
- D. It automatically turns on parallel processing of SAP BW queries.
Answer: A
Explanation:
The model setting Optimize Story Building Performance prevents the automatic refresh of data during story design. This means that users can design stories without waiting for the data to load every time they make a change. Users can manually refresh the data when they want to see the updated results. The model setting does not affect the design experience, the parallel processing, or the story editing. Verified Reference: [SAP Analytics Cloud - Optimize Story Building Performance]
NEW QUESTION # 34
What are data sources for stories?Note: There are 3 correct answers to this question.
- A. Dataset
- B. File
- C. Data Action
- D. Insight
- E. Model
Answer: A,B,E
NEW QUESTION # 35
What is a property of a public dataset?
- A. Its data source can be changed.
- B. Its data is structured in a star schema.
- C. It can be converted to a model.
- D. It can be shared among different stories.
Answer: D
NEW QUESTION # 36
......
C-SACS-2308 Dumps To Pass SAP Exam in 24 Hours - VCEEngine: https://www.vceengine.com/C-SACS-2308-vce-test-engine.html
Buy Latest C-SACS-2308 Exam Q&A PDF - One Year Free Update: https://drive.google.com/open?id=1wKBmvZMffhKLUQ-SgVq8UGifjmBxySFt
