Get Dec-2023 updated Exam 300-730 Dumps with New Questions
100% Pass Guarantee for 300-730 Exam Dumps with Actual Exam Questions
Cisco 300-730 exam is a computer-based test consisting of multiple-choice questions. 300-730 exam is timed, and candidates have 90 minutes to answer all the questions. To pass the exam, candidates need to achieve a score of at least 825 out of 1000. Cisco recommends that candidates have at least two years of experience working with VPN technologies before attempting the exam.
NEW QUESTION # 39
An engineer is using DMVPN to provide secure connectivity between a data center and remote sites. Which two routing protocols should be used between the routers? (Choose two.)
- A. RIPv2
- B. OSPF
- C. EIGRP
- D. IS-IS
- E. BGP
Answer: C,E
NEW QUESTION # 40
Which two changes must be made in order to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is configured? (Choose two.)
- A. Disable EIGRP next-hop-self on the hub.
- B. Add NHRP redirects on the hub.
- C. Add NHRP redirects on the spoke.
- D. Add NHRP shortcuts on the hub.
- E. Enable EIGRP next-hop-self on the hub.
Answer: B,E
Explanation:
DMVPN disables the EIRGP next-hop-self with "no ip next-hop-self eigrp xxx" in DMVPN phase 2, and to go from Phase 2 to 3 you need use the NHRP protocol, and again enable EIRGP next-hop-self with "ip next-hop-self eigrp 134" under the tunnel interface https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec-conn-dmvpn-15-mt-book/sec-conn-dmvpn-dmvpn.html#GUID-BF561439-BCC0-4AAF-80D9-1F7876CB7B81
NEW QUESTION # 41
A network engineer is setting up Cisco AnyConnect 4.9 on a Cisco ASA running ASA software 9.1. Cisco AnyConnect must connect to the Cisco ASA before the user logs on so that login scripts can work successfully. In addition, the VPN must connect without user intervention. Which two key steps accomplish this task? (Choose two.)
- A. Create a Cisco AnyConnect VPN profile with Always On set to true.
- B. Issue an identity certificate to the trusted root CA folder in the machine store.
- C. Create a Network Access Manager profile with a client policy set to connect before user logon.
- D. Create a Cisco AnyConnect VPN profile with Start Before Logon set to true.
- E. Create a Cisco Anyconnect VPN Management Tunnel profile.
Answer: B,D
NEW QUESTION # 42
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. webvpn (global configuration)
- B. tunnel-group (general-attributes)
- C. webvpn (group-policy)
- D. tunnel-group (webvpn-attributes)
Answer: C
NEW QUESTION # 43
Which Cisco AnyConnect component ensures that devices in a specific internal subnet are only accessible using port 443?
- A. VPN filter
- B. WebACL
- C. split tunnel
- D. routing
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/99103-pix-asa-vpn-filter.html#anc6
NEW QUESTION # 44
Refer to the exhibit.
The network administrator must allow the Cisco AnyConnect Secure Mobility Client to securely access the corporate resources via IKEv2 and print locally. Traffic that is destined for the Internet must still be tunneled to the Cisco ASA. Which configuration does the administrator use to accomplish this goal?
- A. Split exclude policy with a deny for 192.168.0.3/32.
- B. Tunnel all policy.
- C. Split exclude policy with a permit for 0.0.0.0/32.
- D. Split include policy with a permit for 192.168.0.0/24.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/70847-local-lan-pix-asa.html
NEW QUESTION # 45
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. webvpn (global configuration)
- B. tunnel-group (general-attributes)
- C. webvpn (group-policy)
- D. tunnel-group (webvpn-attributes)
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa97/configuration/vpn/asa-97-vpn-config/webvpn-configure-policy-groups.html says clearly: In group-policy webvpn configuration mode, you can specify (list of things, including url-list).
NEW QUESTION # 46
Which two features provide headend resiliency for Cisco AnyConnect clients? (Choose two.)
- A. ASA failover
- B. AnyConnect Always On
- C. AnyConnect Backup Servers
- D. AnyConnect Auto Reconnect
- E. AnyConnect Network Access Manager
Answer: A,C
Explanation:
According to the Implementing Secure Solutions with Virtual Private Networks (SVPN) documents and learning resources available at cisco.com, the two features that provide headend resiliency for Cisco AnyConnect clients are:
AnyConnect Backup Servers: This feature allows the AnyConnect client to automatically connect to a backup server in case the primary server is unreachable or fails. The backup server list is configured on the ASA or IOS headend and pushed to the client during the VPN connection establishment. The client can also manually select a backup server from the list if needed. This feature enhances the availability and reliability of the VPN service for the clients12.
ASA failover: This feature enables two identical ASAs to be paired together as an active/standby or active/active pair. The ASAs synchronize their configuration and state information and monitor each other's health. If the active ASA fails or becomes unreachable, the standby ASA takes over the traffic and VPN sessions without any disruption for the clients. This feature provides high availability and redundancy for the VPN headend34.
1: AnyConnect Backup Servers 2: Redundancy options for IOS Headend for AnyConnect Clients 3: ASA Failover 4: AnyConnect Implementation and Performance/Scaling Reference for COVID-19 Preparation
NEW QUESTION # 47
In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue?
- A. Verify that the tunnel interface is contained within a VRF.
- B. Verify that the spoke receives redirect messages and sends resolution requests.
- C. Verify the spoke configuration to check if the NHRP redirect is enabled.
- D. Verify the hub configuration to check if the NHRP shortcut is enabled.
Answer: B
Explanation:
Reference:
On receiving the redirect, Spoke1 initiates a resolution request for Host2 over the point-to-point tunnel interface (the same interface over which it received the redirect). The resolution request traverses the routed path (Spoke1-hub-spoke2). On receiving the resolution request, Spoke2 determines that it is the exit point and needs to respond to the resolution request. https://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/15-2mt/sec-flex-spoke.html
NEW QUESTION # 48
An organization wants to distribute remote access VPN load across 12 VPN headend locations supporting 25,000 simultaneous users. Which load balancing method meets this requirement?
- A. DNS-based load balancing
- B. one VPN profile per site
- C. AnyConnect native load balancing
- D. equal cost, multipath load balancing
Answer: A
NEW QUESTION # 49
Which remote access VPN technology requires the use of the IPsec-proposal configuration option?
- A. IKEv2-based VPN
- B. IKEv1-based VPN
- C. SSLVPN Full Tunnel
- D. clientless SSLVPN
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/vpn/asa-96-vpn-config/vpn-remote-access.html The IPsec-proposal configuration option is used to specify the encryption, integrity, and authentication algorithms that will be used in the IPsec protocol. In the case of IKEv2-based VPN, this option is used to configure the IPsec security associations (SA) that will be established between the VPN client and the VPN gateway during IKEv2 negotiation. IKEv2 uses IPsec as its underlying encryption and authentication protocol, so the IPsec-proposal configuration is essential to establishing a secure VPN tunnel using IKEv2
NEW QUESTION # 50
Which statement about GETVPN is true?
- A. Group members must acknowledge all KEK and TEK rekeys, regardless of configuration.
- B. The configuration that defines which traffic to encrypt originates from the key server.
- C. The pseudotime that is used for replay checking is synchronized via NTP.
- D. TEK rekeys can be load-balanced between two key servers operating in COOP.
Answer: B
NEW QUESTION # 51
A network administrator wants the Cisco ASA to automatically start downloading the Cisco AnyConnect client without prompting the user to select between WebVPN or AnyConnect. Which command accomplishes this task?
- A. anyconnect ask enable default anyconnect
- B. anyconnect modules value default
- C. anyconnect ask none default anyconnect
- D. anyconnect ssl df-bit-ignore enable
Answer: C
Explanation:
https://networklessons.com/cisco/asa-firewall/cisco-asa-anyconnect-remote-access-vpn#:~:text=The%20anyconnect%20ask%20command%20specifies,of%20the%20anyconnect%20client%20automatically.
NEW QUESTION # 52
Which two features are valid backup options for an IOS FlexVPN client? (Choose two.)
- A. need distractor
- B. tunnel pivot
- C. reactivate primary peer
- D. HSRP stateless failover
- E. DNS-based hub resolution
Answer: C,E
NEW QUESTION # 53
Which command shows the smart default configuration for an IPsec profile?
- A. show run all crypto ipsec profile
- B. show crypto ipsec profile default
- C. show smart-defaults ipsec profile
- D. ipsec profile does not have any smart default configuration
Answer: B
Explanation:
The following table lists the commands that are enabled with the IKEv2 Smart Defaults feature, along with the default values.
...
Device# show crypto ipsec profile default
IPSEC profile default
Security association lifetime: 4608000 kilobytes/3600 seconds
Responder-Only (Y/N): N
PFS (Y/N): N
Transform sets={
default: { esp-aes esp-sha-hmac },
}
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/xe-3s/sec-flex-vpn-xe-3s-book/sec-cfg-ikev2-flex.html
NEW QUESTION # 54
Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?
- A. WebType ACL
- B. single sign-on
- C. plug-ins
- D. Smart Tunnel
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ vpn_clientless_ssl.html#29951
NEW QUESTION # 55
An engineer is configuring clientless SSL VPN. The finance department has a database server that only they should access, but the sales department can currently access it. The finance and the sales departments are configured as separate group-policies. What must be added to the configuration to make sure the users in the sales department cannot access the finance department server?
- A. port forwarding
- B. smart tunnel
- C. tunnel group lock
- D. webtype ACL
Answer: C
NEW QUESTION # 56
A user is experiencing delays on audio calls over a Cisco AnyConnect VPN. Which implementation step resolves this issue?
- A. Change to 3DES Encryption.
- B. Shorten the encryption key lifetime.
- C. Enable DTLS.
- D. Install the Cisco AnyConnect 2.3 client for the user to download.
Answer: C
NEW QUESTION # 57
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?
- A. auto-upgrade
- B. auto-connect
- C. auto-run
- D. auto-start
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/vpn/asa_91_vpn_config/ webvpn-configure-policy-group.html
NEW QUESTION # 58
......
To pass the Cisco 300-730 exam, candidates must demonstrate their ability to deploy and manage VPN solutions in a variety of network environments. This includes understanding key security concepts, such as encryption, authentication, and access control, as well as configuring and troubleshooting VPN connections. Candidates must also be familiar with various VPN technologies, including SSL VPNs and IPsec VPNs, and be able to select the appropriate solution for a given scenario. Overall, the Cisco 300-730 exam is a comprehensive test of a candidate's knowledge and expertise in VPN technologies and is an essential certification for professionals working in network security.
How can I prepare for this exam?
Cisco 300-730 Exam is really a challenging exam to pass, but you can get a high score if you prepare well for it. First of all, a Cisco 300-730 Exam Certification is not that hard to find. But the problem is how to choose the right training resources for your 300-730 Exam preparation. There are so many Cisco 300-730 Exam resources online that it could make your head spin. Trying to decide which one to buy is hard because there are so many different ones available. Also, some Cisco 300-730 Exam resources are more effective than others, and some are even a complete waste of your time and money. So what can you do? How do you know which Cisco 300-730 Exam resource will give you the results you need? In order to be successful in passing your Cisco 300-730 Exam, you have to use this Cisco 300-730 Dumps. This study material is guaranteed to make passing your Cisco 300-730 Exam a breeze. You will be completely prepared to take on your exam with complete confidence when you go through this material. This material will cover everything that is included in the Cisco certification exam and much more material that will help you with the real-world application.
300-730 exam dumps with real Cisco questions and answers: https://www.vceengine.com/300-730-vce-test-engine.html
Today Updated 300-730 Exam Dumps Actual Questions: https://drive.google.com/open?id=1u3CfHVLyfwRs-1r77Q329Kb0kZjzwY0K
