Netskope Exam 2024 NSK300 Dumps Updated Questions UPDATED Nov-2024
Get The Most Updated NSK300 Dumps To Netskope NCCSA Certification
NEW QUESTION # 36
Review the exhibit.
You are attempting to block uploads of password-protected files. You have created the file profile shown in the exhibit.
Where should you add this profile to use in a Real-time Protection policy?
- A. Add the profile directly to a Real-time Protection policy as a Constraint.
- B. Add the profile to a Malware Detection profile that is used in a Real-time Protection policy.
- C. Add the profile to a DLP profile that is used in a Real-time Protection policy.
- D. Add the profile to a Constraint profile that is used in a Real-time Protection policy.
Answer: C
Explanation:
In Netskope Cloud Security, to block uploads of password-protected files, you should add the file profile to a DLP (Data Loss Prevention) profile that is used in a Real-time Protection policy. The DLP profiles in Netskope are designed to detect and protect sensitive data in real-time and at rest across the cloud environment. This approach ensures that any file matching the criteria set in the file profile, such as being password-protected, will trigger the DLP rules and prevent the upload action in real-time.
NEW QUESTION # 37
You are architecting a Netskope steering configuration for devices that are not owned by the organization The users could be either on-premises or off-premises and the architecture requires that traffic destined to the company's instance of Microsoft 365 be steered to Netskope for inspection.
How would you achieve this scenario from a steering perspective?
- A. Use reverse proxy.
- B. Use explicit proxy and the Netskope Client
- C. Use IPsec and GRE tunnels.
- D. Use DPoP and Secure Forwarder
Answer: B
Explanation:
For devices not owned by the organization, using an explicit proxy along with the Netskope Client is the best approach to steer traffic for inspection. This method allows for granular control over the traffic, ensuring that only the traffic destined for the company's instance of Microsoft 365 is inspected by Netskope. The explicit proxy configuration can be applied regardless of whether the users are on-premises or off-premises, providing a consistent steering mechanism for all users.
NEW QUESTION # 38
You created a Real-time Protection policy that blocks all activities to non-corporate S3 buckets, but determine that the policy is too restrictive. Specifically, users are complaining that normal websites have stopped rendering properly.
How would you solve this problem?
- A. Create a Real-time Protection policy to allow the Download activity to the Amazon S3 application
- B. Create a Real-time Protection policy to allow the Download activity to the Cloud Storage category
- C. Create a Real-time Protection policy to allow the Browse activity to the Cloud Storage category
- D. Create a Real-time Protection policy to allow the Browse activity to the Amazon S3 application.
Answer: C
Explanation:
To solve the problem of normal websites not rendering properly due to a Real-time Protection policy that blocks all activities to non-corporate S3 buckets, the best solution is to create a Real-time Protection policy to allow the Browse activity to the Cloud Storage category. This approach will enable users to view content from various cloud storage services, including Amazon S3, without allowing full access to non-corporate S3 buckets. It's a more granular and less restrictive policy that allows necessary browsing activities while still maintaining control over the upload and download activities to non-corporate buckets1.
NEW QUESTION # 39
You jus! deployed and registered an NPA publisher for your first private application and need to provide access to this application for the Human Resources (HR) users group only. How would you accomplish this task?
- A. 1. Create a new private app and assign it to the HR user group.
2. Create a new Real-time Protection policy as follows:
Source = HR user group Destination = Private App Action = Allow. - B. 1. Enable private app steering in the Steering Configuration assigned to the HR group.
2. Create a new Private App.
3. Create a new Real-time Protection policy as follows;
Source = HR user group Destination = Private App Action = Allow - C. 1. Enable private app steering in Tenant Steering Configuration.
2. Create a new private app and assign it to the HR user group. - D. 1. Enable private app steering in the Steering Configuration assigned to the HR group.
2. Create a new private app and assign it to the HR user group
3. Create a new Real-time Protection policy as follows:Source = HR user group Destination = Private App Action = Allow
Answer: D
Explanation:
To provide access to a private application for the Human Resources (HR) users group only after deploying and registering an NPA publisher, you would need to:
Enable private app steering in the Steering Configuration assigned to the HR group: This ensures that only traffic from the HR user group is steered towards the private application.
Create a new private app and assign it to the HR user group: This step involves defining the private application within Netskope and specifying that only the HR user group should have access to it.
Create a new Real-time Protection policy as follows:
Source = HR user group: This specifies that the policy applies to the HR user group.
Destination = Private App: This defines the private application as the destination for the policy.
Action = Allow: This action allows the HR user group to access the private application.
By following these steps, you can ensure that only the HR user group has access to the private application, aligning with the principles of least privilege and zero trust access control.
NEW QUESTION # 40
You deployed the Netskope Client for Web steering in a large enterprise with dynamic steering. The steering configuration includes a bypass rule for an application that is IP restricted. What is the source IP for traffic to this application when the user is on-premises at the enterprise?
- A. Enterprise Egress IPv4
- B. DHCP assigned RFC1918 IPv4
- C. Loopback IPv4
- D. Netskope data plane gateway IPv4
Answer: A
Explanation:
When a user is on-premises at the enterprise and accesses an application that is IP restricted, the source IP for traffic to this application is the Enterprise Egress IPv4 address.
The Enterprise Egress IP represents the external IP address of the enterprise network as seen by external services or applications.
This IP address is used for communication between the user's device and external resources, including applications that are IP restricted. Reference:
The answer is based on general knowledge of networking concepts and how IP addresses are used in enterprise environments.
NEW QUESTION # 41
You want to verify that Google Drive is being tunneled to Netskope by looking in the nsdebuglog file. You are using Chrome and the Netskope Client to steer traffic. In this scenario, what would you expect to see in the log file?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
When verifying that Google Drive traffic is being tunneled to Netskope using Chrome and the Netskope Client, you would expect to see log entries indicating that the traffic is being directed through Netskope's proxy. Specifically, Option A is correct as it shows the process "google drive" being tunneled to nsProxy. The log entry for Option A indicates that a TLS tunneling flow from a local address and process (Google Drive) is being directed to a host (play.googleapis.com) and then to Netskope's proxy (nsProxy). This is consistent with how Netskope tunnels specified traffic for security and policy enforcement1.
NEW QUESTION # 42
You configured a pair of IPsec funnels from the enterprise edge firewall to a Netskope data plane. These tunnels have been implemented to steer traffic for a set of defined HTTPS SaaS applications accessed from end-user devices that do not support the Netskope Client installation. You discover that all applications steered through this tunnel are non-functional.
According to Netskope. how would you solve this problem?
- A. Install the Netskope root and intermediate certificates on the end-user devices.
- B. Restart the tunnel to stop the tunnel from flapping.
- C. Disable Perfect Forward Secrecy on the tunnel configuration.
- D. Downgrade from IKE v2 to IKE v1.
Answer: A
Explanation:
When applications steered through an IPsec tunnel are non-functional, it is often due to the lack of proper trust establishment between the end-user devices and the Netskope data plane. The solution is to install the Netskope root and intermediate certificates on the end-user devices . This ensures that the devices recognize and trust the encrypted connection established by the IPsec tunnel, allowing the HTTPS SaaS applications to function correctly. Without these certificates, the devices may not be able to verify the security of the connection, leading to application failures.
NEW QUESTION # 43
You are using Netskope CSPM for security and compliance audits across your multi-cloud environments. To decrease the load on the security operations team, you are researching how to auto-re mediate some of the security violations found in low-risk environments.
Which statement is correct in this scenario?
- A. You can use Netskope Auto-remediation frameworks from the public Netskope GitHub Open Source repository for auto-re mediation of security violation results.
- B. Netskope does not support automatic remediation of security violation results due to the high risk associated with it.
- C. You can use Netskope API-enabled Protection for auto-remediation of security violation results.
- D. You can use Netskope Cloud Exchange for auto-remediation of security violation results.
Answer: A
Explanation:
Netskope supports automatic remediation of security violations through its Auto-Remediation frameworks, which are available in the public Netskope GitHub Open Source repository. These frameworks allow for the automatic mitigation of risks associated with security misconfigurations in your cloud environment. The Netskope Auto-Remediation framework for AWS, for example, deploys a set of AWS Lambda functions that query the Netskope API at scheduled intervals and automatically mitigates supported violations1. Similarly, there are frameworks for GCP and other cloud environments that follow the same principle2. This capability is particularly useful for low-risk environments where the security operations team's workload can be reduced by automating the remediation process.
NEW QUESTION # 44
Review the exhibit.
You installed Directory Importer and configured it to import specific groups ot users into your Netskope tenant as shown in the exhibit. One hour after a new user has been added to the domain, the user still has not been provisioned to Netskope.
What are three potential reasons for this failure? (Choose three.)
- A. The default collection interval is 180 minutes, therefore a sync may not have run yet.
- B. Directory Importer does not support ongoing user syncs; you must manually provision the user.
- C. The user is not a member of the group specified as a filter
- D. Active Directory integration is not enabled on your tenant.
- E. The server that the Directory Importer is installed on is unable to reach Netskope's add-on endpomt.
Answer: A,C,E
Explanation:
The three potential reasons for the failure of a new user not being provisioned to Netskope an hour after being added to the domain could be:
B . The server that the Directory Importer is installed on is unable to reach Netskope's add-on endpoint: If the server cannot connect to Netskope's endpoint, it cannot sync the user data. This could be due to network issues, incorrect configuration, or firewall restrictions1.
C . The user is not a member of the group specified as a filter: The Directory Importer may be configured to import users from specific groups only. If the new user is not a member of these groups, they will not be imported into Netskope1.
E . The default collection interval is 180 minutes, therefore a sync may not have run yet: The Directory Importer may be scheduled to sync every 180 minutes. If only an hour has passed, the sync process might not have occurred yet, and the user would not be provisioned until the next sync interval1.
NEW QUESTION # 45
You are implementing a solution to deploy Netskope for machine traffic in an AWS account across multiple VPCs. You want to deploy the least amount of tunnels while providing connectivity for all VPCs.
How would you accomplish this task?
- A. Use GRE tunnels from the AWS Transit Gateway.
- B. Use GRE tunnels from the AWS Virtual Private Gateway
- C. Use IPsec tunnels from the AWS Virtual Private Gateway.
- D. Use IPsec tunnels from the AWS Transit Gateway.
Answer: D
Explanation:
The best approach to deploy Netskope for machine traffic across multiple VPCs in an AWS account with the least amount of tunnels while providing connectivity for all VPCs is to use IPsec tunnels from the AWS Transit Gateway. This method allows you to use the same Site-to-Site VPN connection to Netskope for multiple VPCs, thus minimizing the number of tunnels required12. The AWS Transit Gateway acts as a network transit hub, enabling you to connect your VPCs and on-premises networks through a central point of management and control. Using IPsec tunnels with the AWS Transit Gateway ensures that all VPCs connected to it utilize the same IPsec tunnel between the transit gateway and Netskope POP1.
NEW QUESTION # 46
Your customer is currently using Directory Importer with Active Directory (AD) to provision users to Nelskope. They have recently acquired three new companies (A. B. and C) and want to onboard users from the companies onto the NetsKope platform. Information about the companies is shown below.
- Company A uses Active Directory.
-- Company B uses Azure AD.
-- Company C uses Okta Universal Directory.
Which statement is correct in this scenario?
- A. Users from Companies A. B, and C can be provisioned to Netskope by deploying additional AD Importers and integrating more than one SCIM solution.
- B. Company A users cannot be provisioned to Netskope because the customer is already using AD Importer to import users from another Active Directory environment.
- C. Either Company B or Company C users cannot be provisioned because integration with only one SCIM solution is allowed.
- D. Users from Company B and Company C cannot be provisioned because the customer is already using AD Importer.
Answer: A
Explanation:
Users from Companies A, B, and C can indeed be provisioned to Netskope. Company A, which uses Active Directory, can continue to use the existing AD Importer. For Company B that uses Azure AD and Company C that uses Okta Universal Directory, integration with SCIM (System for Cross-domain Identity Management) solutions is possible. Netskope supports provisioning users from multiple directories, including Active Directory and cloud-based identity providers like Azure AD and Okta, by using additional AD Importers and integrating more than one SCIM solution12.
NEW QUESTION # 47
Users in your network are attempting to reach a website that has a self-signed certificate using a GRE tunnel to Netskope. They are currently being blocked by Netskope with an SSL error. How would you allow this traffic?
- A. Configure a Do Not Decrypt SSL Decryption rule to allow traffic to pass.
- B. Set the No SNI setting in Netskope to Bypass.
- C. Ensure that the users add the self-signed certificate to their local certificate store.
- D. Configure a Real-time Protection policy with the action set to Allow.
Answer: A
NEW QUESTION # 48
Your company just had a new Netskope tenant provisioned and you are asked to create a secure tenant configuration. In this scenario, which two default settings should you change? {Choose two.)
- A. Change Untrusted Root Certificate to Block.
- B. Change Safe Search to Disabled
- C. Change "Disallow concurrent logins by an Admin" to Enabled.
- D. Change the No SNI setting to Block.
Answer: A,C
Explanation:
For a new Netskope tenant provisioned, to create a secure tenant configuration, you should consider changing the following default settings:
B . Change Untrusted Root Certificate to Block: This setting will ensure that any traffic coming from an untrusted root certificate is blocked, which is a critical security measure to prevent man-in-the-middle attacks and other types of cyber threats1.
D . Change "Disallow concurrent logins by an Admin" to Enabled: This setting will prevent multiple concurrent logins by the same admin account, which is an important security control to mitigate the risk of unauthorized access. If an admin's credentials are compromised, this setting will help limit the potential damage by ensuring that only one session can be active at a time1.
These changes are part of the recommended security hardening guidelines for Netskope tenants to enhance the overall security posture of the tenant environment.
NEW QUESTION # 49
You are currently designing a policy for AWS S3 bucket scans with a custom DLP profile Which policy action(s) are available for this policy?
- A. Alert only
- B. Alert, Quarantine
- C. Alert, Quarantine. Block, User Notification
- D. Alert, User Notification
Answer: B
Explanation:
When designing a policy for AWS S3 bucket scans with a custom DLP profile in Netskope, the available policy actions are Alert and Quarantine. These actions allow you to be notified when a policy violation occurs and to quarantine sensitive data to prevent potential data loss or exposure. The Alert action will notify the designated personnel or system when a match to the DLP profile is found during the scan. The Quarantine action will move the offending file to a secure location where it can be reviewed and dealt with appropriately1.
NEW QUESTION # 50
Users in your network are attempting to reach a website that has a self-signed certificate using a GRE tunnel to Netskope. They are currently being blocked by Netskope with an SSL error. How would you allow this traffic?
- A. Configure a Do Not Decrypt SSL Decryption rule to allow traffic to pass.
- B. Set the No SNI setting in Netskope to Bypass.
- C. Ensure that the users add the self-signed certificate to their local certificate store.
- D. Configure a Real-time Protection policy with the action set to Allow.
Answer: A
Explanation:
To allow traffic from a website with a self-signed certificate that is being blocked by Netskope with an SSL error, the correct action is to configure a Do Not Decrypt SSL Decryption rule. This rule will allow the traffic to pass without being decrypted, thus bypassing the SSL error caused by the self-signed certificate. This is a common practice for handling traffic from trusted internal applications or specific external sites that use self-signed certificates1.
NEW QUESTION # 51
You built a number of DLP profiles for different sensitive data types. If a file contains any of this sensitive data, you want to take the most restrictive policy action but also create incident details for all matching profiles.
Which statement is correct in this scenario?
- A. Create a single Real-time Protection policy and include all of the DLP profiles; all matched profiles will show up in a single DLP incident.
- B. Create a Real-time Protection policy for each DLP profile; all matched profiles will show up in a single DLP incident
- C. Create a Real-time Protection policy for each DLP profile; each matched profile will generate a unique DLP incident.
- D. Create a single Real-time Protection policy and include all of the DLP profiles; each matched profile will generate a unique DLP incident
Answer: A
Explanation:
When configuring a Real-time Protection policy with multiple DLP profiles, if the content matches multiple profiles, the policy performs the most restrictive action associated with the DLP profiles that match for that policy. The resulting incident lists all the profiles that matched along with their corresponding forensic information. This means that even though the most restrictive action is taken, details for all matching profiles are created and included in a single DLP incident12.
NEW QUESTION # 52
Review the exhibit.
A user has attempted to upload a file to Microsoft OneDrive that contains source code with Pll and PCI data.
Referring to the exhibit, which statement Is correct?
- A. The user will be alerted and a single incident will be generated referencing the DLP-PII profile.
- B. The user will be blocked and a separate incident will be generated for each of the matching DLP profiles.
- C. The user will be blocked and a single Incident will be generated referencing the DLP-PCI profile.
- D. The user will be blocked and a single Incident will be generated referencing all of the matching DLP profiles
Answer: B
Explanation:
In the given scenario, a user is attempting to upload a file containing sensitive PII and PCI data to Microsoft OneDrive. The Netskope Security Cloud provides real-time data and threat protection when accessing cloud services, websites, and private apps from anywhere, on any device. Based on the exhibit provided, different DLP (Data Loss Prevention) profiles are triggered - DLP-SourceCode, DLP-PCI, and DLP-PII. Each of these profiles has specific actions associated with them; for instance, an alert is generated for Source Code while blocking actions are initiated for PCI and PII data. Since multiple DLP profiles are triggered due to the sensitive nature of the content in the file being uploaded, separate incidents will be generated for each matching profile ensuring comprehensive security coverage and incident reporting.
Reference:
Netskope Cloud Security
Netskope Resources
Netskope Documentation
NEW QUESTION # 53
A hospital has a patient form that they share with their patients over Gmail. The blank form can be freely shared among anyone. However, if the form has any information filled out. the document is considered confidential.
Which rule type should be used in the DLP profile to match such a document?
- A. Use a dictionary rule for all your patient names.
- B. Use fingerprint classification.
- C. Use Exact Match with patient names
- D. Use predefined DLP Rule(s) that match the patient name.
Answer: B
Explanation:
The appropriate rule type to use in the DLP profile for a document that is considered confidential when filled out is fingerprint classification. Fingerprinting is a method used to identify and protect sensitive data within documents. It works by creating a digital fingerprint of a file, which can then be used to detect any copies or derivatives of that file. In this case, fingerprinting would allow the hospital to differentiate between the blank patient form, which can be freely shared, and the same form with patient information filled out, which is confidential1.
NEW QUESTION # 54
Your Netskope Client tunnel has connected to Netskope; however, the user is not receiving any steering or client configuration updates What would cause this issue?
- A. The Netskope Client service is not running.
- B. The client is unable to establish communication to add-on-[tenantl.goskope.com.
- C. The client is unable to establish communication to gateway-(tenant|.goskope.com.
- D. An invalid steering exception was created in the tenant
Answer: A
Explanation:
When the Netskope Client service is not running, it cannot execute the necessary processes to receive steering or client configuration updates. The service must be active to establish communication with the Netskope cloud and apply the configurations and policies defined by the administrator.
NEW QUESTION # 55
You are already using Netskope CSPM to monitor your AWS accounts for compliance. Now you need to allow access from your company-managed devices running the Netskope Client to only Amazon S3 buckets owned by your organization. You must ensure that any current buckets and those created in the future will be allowed Which configuration satisfies these requirements?
- A. Steering: Cloud Apps Only, All Traffic Policy type: Real-time Protection Constraint: Storage. Bucket Does Not Match -ALLAccounts Action: Block
- B. Steering: All Web Traffic Policy type: API Data Protection Constraint: Storage, Bucket Does Match *@myorganization.com Action: Allow
- C. Steering: Cloud Apps Only. All Traffic Policy type: Real-time Protection Constraint: Storage. Bucket Does Match -ALLAccounts Action: Allow
- D. Steering: Cloud Apps Only Policy type: Real-time Protection
Constraint: Storage. Bucket Does Not Match *@myorganization.com Action: Block
Answer: C
Explanation:
To allow access from company-managed devices running the Netskope Client to only Amazon S3 buckets owned by the organization, the following configuration satisfies the requirements:
Steering Configuration:
Policy Type: Real-time Protection
Constraint: Storage
Bucket Condition: Bucket Does Match -ALLAccounts
Action: Allow
By configuring the policy to allow traffic from company-managed devices (Netskope Clients) to Amazon S3 buckets, the organization ensures that only buckets owned by the organization are accessible.
The -ALLAccounts condition ensures that both existing and future buckets are allowed.
This configuration aligns with the requirement to allow access to organization-owned buckets while blocking access to other buckets.
Reference:
Netskope Cloud Security
Netskope Solution Brief
Netskope Community
NEW QUESTION # 56
You are troubleshooting an issue with users who are unable to reach a financial SaaS application when their traffic passes through Netskope. You determine that this is because of IP restrictions in place with the SaaS vendor. You are unable to add Netskope's IP ranges at this time, but need to allow the traffic.
How would you allow this traffic?
- A. Use Explicit Proxy Over Tunnel (EPoT) so the traffic will egress from the corporate data center.
- B. Use an IPsec tunnel to forward traffic so it will egress from the corporate data center
- C. Use Cloud Explicit Proxy so the traffic will egress from the corporate data center
- D. Use NPAto implement Source IP anchonng so the traffic will egress from the corporate data center.
Answer: C
Explanation:
To allow traffic to a financial SaaS application that is being blocked due to IP restrictions, the best option is to use Cloud Explicit Proxy. This method allows traffic to egress from the corporate data center without requiring Netskope's IP ranges to be added to the SaaS vendor's allowlist. By configuring an allowlist in the Cloud Explicit Proxy settings, you can add any source egress IP addresses for your on-premises users, and Netskope will allow the traffic from the added user and IP address without authenticating1.
NEW QUESTION # 57
You have users connecting to Netskope from around the world You need a way for your NOC to quickly view the status of the tunnels and easily visualize where the tunnels are located Which Netskope monitoring tool would you use in this scenario?
- A. Network Events in Skope IT
- B. Alerts in Skope IT
- C. Network Steering in Digital Experience Management
- D. Web Usage Summary in Advanced Analytics
Answer: C
Explanation:
Network Steering in Digital Experience Management is the appropriate Netskope monitoring tool for this scenario. It allows the Network Operations Center (NOC) to quickly view the status of the tunnels and provides an easy way to visualize the locations of the tunnels. This tool is designed to give a clear overview of network health and performance, which is essential for managing global connectivity and ensuring the reliability of the service.
NEW QUESTION # 58
A recent report states that users are using non-sanctioned Cloud Storage platforms to share data Your CISO asks you for a list of aggregated users, applications, and instance IDs to increase security posture Which Netskope tool would be used to obtain this data?
- A. Cloud Confidence Index (CCI)
- B. Behavior Analytics
- C. Applications in Skope IT
- D. Advanced Analytics
Answer: D
Explanation:
To obtain a list of aggregated users, applications, and instance IDs, especially when dealing with non-sanctioned Cloud Storage platforms, the Advanced Analytics (A) tool within Netskope would be used. Advanced Analytics provides in-depth visibility into cloud app usage and activities. It allows security teams to create detailed reports and dashboards that can help identify risks and ensure compliance with company policies by analyzing user behavior, application access, and data movement across the organization1.
NEW QUESTION # 59
Your company purchased Netskope's Next Gen Secure Web Gateway You are working with your network administrator to create GRE tunnels to send traffic to Netskope Your network administrator has set up the tunnel, keepalives. and a policy-based route on your corporate router to send all HTTP and HTTPS traffic to Netskope. You want to validate that the tunnel is configured correctly and that traffic is flowing.
In this scenario, which two statements are correct? (Choose two.)
- A. You can verify that the tunnel is up in the Netskope Trust portal at https://trust netskope.com/.
- B. You must use your own monitoring tools to verify that the tunnel is up.
- C. You can verify that the tunnel is up and receiving traffic in the Netskope Ul under Settings > Security Cloud Platform > GRE.
- D. You can use your local router or network device to verify that keepalives are being received and traffic is flowing to Netskope.
Answer: C,D
Explanation:
To validate that the GRE tunnel is configured correctly and that traffic is flowing to Netskope, the correct statements are:
A: You can use your local router or network device to verify that keepalives are being received and traffic is flowing to Netskope. This is a standard method for checking the health and activity of a GRE tunnel.
C: You can verify that the tunnel is up and receiving traffic in the Netskope UI under Settings > Security Cloud Platform > GRE. This is a feature provided by Netskope to monitor the status of GRE tunnels directly from the Netskope interface12.
Statement B is incorrect because Netskope provides its own tools for monitoring the status of the tunnel. Statement D is incorrect because the Netskope Trust portal provides information on the overall service status and updates, not specific tunnel status3.
NEW QUESTION # 60
You have multiple networking clients running on an endpoint and client connectivity is a concern. You are configuring co-existence with a VPN solution in this scenario, what is recommended to prevent potential routing issues?
- A. Modify the VPN to operate in full tunnel mode at Layer 3. so that the Netskope agent will always see the traffic first.
- B. Configure a Network Location with the VPN IP ranges and add it as a Steering Configuration exception.
- C. Configure the VPN to full tunnel traffic and add an SSL Do Not Decrypt policy to the VPN configuration for all Netskope traffic.
- D. Configure the VPN to split tunnel traffic by adding the Netskope IP and Google DNS ranges and set to Exclude in the VPN configuration.
Answer: A
Explanation:
To prevent potential routing issues and ensure that the Netskope agent consistently sees the traffic first, it is recommended to modify the VPN to operate in full tunnel mode at Layer 3.
In full tunnel mode, all traffic from the endpoint is routed through the VPN, including traffic destined for Netskope. This ensures that the Netskope agent can inspect and apply policies to all traffic, regardless of the destination.
Layer 3 full tunnel mode provides better visibility and control over the traffic flow, reducing the risk of routing conflicts or bypassing the Netskope inspection. Reference:
The answer is based on general knowledge of VPN configurations and their impact on traffic routing.
NEW QUESTION # 61
......
Netskope Certified NSK300 Dumps Questions Valid NSK300 Materials: https://www.vceengine.com/NSK300-vce-test-engine.html
Current NSK300 Exam Dumps [2024] Complete Netskope Exam Smoothly: https://drive.google.com/open?id=1pfS7O1JW5L917ty6MF2g3fB5c92NDUBD
