Pass RedHat EX200 Exam With Practice Test Questions Dumps Bundle
2025 Valid EX200 test answers & RedHat Exam PDF
To prepare for the RHCSA exam, candidates need to have a good understanding of Linux fundamentals, including system administration, networking, and security. The Red Hat training program provides comprehensive training on these topics and prepares the candidates for the exam. Candidates can also take advantage of online resources and practice exams to further enhance their knowledge and skills.
NEW QUESTION # 85
Make on /archive directory that only the user owner and group owner member can fully access.
Answer:
Explanation:
see explanation below.
Explanation
* chmod 770 /archive
* Verify using : ls -ld /archive Preview should be like:
drwxrwx--- 2 root sysuser 4096 Mar 16 18:08 /archive
To change the permission on directory we use the chmod command. According to the question that only the owner user (root) and group member (sysuser) can fully access the directory so: chmod 770 /archive
NEW QUESTION # 86
Add admin group and set gid=600
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# groupadd -g 600 admin
NEW QUESTION # 87
Upgrading the kernel as 2.6.36.7.1, and configure the system to Start the default kernel, keep the old kernel available.
Answer:
Explanation:
# cat /etc/grub.conf
# cd /boot
# lftp it
# get dr/dom/kernel-xxxx.rpm
# rpm -ivh kernel-xxxx.rpm
# vim /etc/grub.conf
default=0
NEW QUESTION # 88
CORRECT TEXT
Create a 512M partition, make it as ext4 file system, mounted automatically under /mnt/data and which take effect automatically at boot-start.
Answer:
Explanation:
# fdisk /dev/vda
n
+512M
w
# partprobe /dev/vda
# mkfs -t ext4 /dev/vda5
# mkdir -p /data
# vim /etc/fstab
/dev/vda5 /data ext4 defaults 0 0
# mount -a
NEW QUESTION # 89
Adjust Logical Volume Size
Adjust the size of the logical volume "vo" and its filesystem to 300 MiB, ensuring that the filesystem content remains unchanged.
Note: Partition sizes rarely match the requested size exactly, so a range of 290 MiB to 310 MiB is acceptable.
For ext4 filesystems, use resize2fs to take effect immediately; for xfs filesystems, use xfs_growfs to take effect immediately.
Answer:
Explanation:
# Scan logical volumes
[root@node2 ~]# lvscan
# Extend the logical volume. With -rL, the filesystem space is adjusted immediately after extending the volume.
[root@node2 ~]# lvextend -rL 300M /dev/myvol/vo
# Check the changes
[root@node2 ~]# lsblk
[root@node2 ~]# lvs
# Verification
[root@node2 ~]# df -h
NEW QUESTION # 90
Download ftp://192.168.0.254/pub/boot.iso to /root, and mounted automatically under /media/cdrom and which take effect automatically at boot-start.
Answer:
Explanation:
see explanation below.
Explanation
# cd /root; wget ftp://192.168.0.254/pub/boot.iso
# mkdir -p /media/cdrom
# vim /etc/fstab
/root/boot.iso /media/cdrom iso9660 defaults,loop 0 0
# mount -a
mount [-t vfstype] [-o options] device dir
NEW QUESTION # 91
Copy /etc/fstab to /var/tmp name admin, the user1 could read, write and modify it, while user2 without any permission.
Answer:
Explanation:
see explanation below.
Explanation
# cp /etc/fstab /var/tmp/
# chgrp admin /var/tmp/fstab
# setfacl -m u:user1:rwx /var/tmp/fstab
# setfacl -m u:user2:--- /var/tmp/fstab
# ls -l
-rw-rw-r--+ 1 root admin 685 Nov 10 15:29 /var/tmp/fstab
NEW QUESTION # 92
Part 2 (on Node2 Server)
Task 8 [Tuning System Performance]
Set your server to use the recommended tuned profile
Answer:
Explanation:
[root@node2 ~]# tuned-adm list
[root@node2 ~]# tuned-adm active
Current active profile: virtual-guest
[root@node2 ~]# tuned-adm recommend
virtual-guest
[root@node2 ~]# tuned-adm profile virtual-guest
[root@node2 ~]# tuned-adm active
Current active profile: virtual-guest
[root@node2 ~]# reboot
[root@node2 ~]# tuned-adm active
Current active profile: virtual-guest
NEW QUESTION # 93
Create a catalog under /home named admins. Its respective group is requested to be the admin group. The group users could read and write, while other users are not allowed to access it. The files created by users from the same group should also be the admin group.
Answer:
Explanation:
# cd /home/
# mkdir admins /
# chown .admin admins/
# chmod 770 admins/
# chmod g+s admins/
NEW QUESTION # 94
Create a collaborative directory/home/admins with the following characteristics:
Group ownership of /home/admins is adminuser
The directory should be readable, writable, and accessible to members of adminuser, but not to any other user. (It is understood that root has access to all files and directories on the system.) Files created in /home/admins automatically have group ownership set to the adminuser group
Answer:
Explanation:
mkdir /home/admins
chgrp -R adminuser /home/admins
chmodg+w /home/admins
chmodg+s /home/admins
NEW QUESTION # 95
According the following requirements to create user, user group and the group members:
- A group named admin.
- A user named mary, and belong to admin as the secondary group.
- A user named alice, and belong to admin as the secondary group.
- A user named bobby, bobby's login shell should be non-interactive. Bobby not belong to admin as the secondary group.
Mary, Alice, bobby users must be set "password" as the user's password.
Answer:
Explanation:
see explanation below.
Explanation
groupadd admin
useradd -G admin mary
useradd -G admin alice
useradd -s /sbin/nologin bobby
echo "password" | passwd --stdin mary
echo "password" | passwd --stdin alice
echo "password" | passwd --stdin bobby
NEW QUESTION # 96
Install the Kernel Upgrade.
Install suitable kernel update from:
http://server.domain11.example.com/pub/updates.
Following requirements must be met:
Updated kernel used as the default kernel of system start-up.
The original kernel is still valid and can be guided when system starts up.
Answer:
Explanation:
Using the browser open the URL in the question, download kernel file to root or home directory.
uname -r// check the current kernel version
rpm -ivh kernel-*.rpm
vi /boot/grub.conf// check
Some questions are: Install and upgrade the kernel as required. To ensure that grub2 is the default item for startup.
Yum repo : http://content.example.com/rhel7.0/x86-64/errata
OR
uname -r // check kernel
Yum-config-manager --add-repo="http://content.example.com/rhel7.0/x86-64/ errata" Yum clean all Yum list kernel// install directly Yum -y install kernel// stuck with it, do not pipe! Please do not pipe!
Default enable new kernel grub2-editenv list// check
Modify grub2-set-default "kernel full name"
Grub2-mkconfig -o/boot/grub2/grub.cfg// Refresh
NEW QUESTION # 97
Configure autofs.
Configure the autofs automatically mount to the home directory of LDAP, as required:
server.domain11.example.com use NFS to share the home to your system. This file system contains a pre configured home directory of user ldapuserX.
Home directory of ldapuserX is:
server.domain11.example.com /home/guests/ldapuser
Home directory of ldapuserX should automatically mount to the ldapuserX of the local /home/guests Home directory's write permissions must be available for users ldapuser1's password is password
Answer:
Explanation:
yum install -y autofs
mkdir /home/rehome
/etc/auto.master
/home/rehome/etc/auto.ldap
Keep then exit
cp /etc/auto.misc /etc/auto.ldap
/etc/auto.ldap
ldapuserX -fstype=nfs,rw server.domain11.example.com:/home/guests/
Keep then exit
systemctl start autofs
systemctl enable autofs
su - ldapuserX// test
If the above solutions cannot create files or the command prompt is -bash-4.2$, it maybe exist multi-level directory, this needs to change the server.domain11.example.com:/home/guests/ to server.domain11.example.com:/home/guests/ldapuserX. What is multi-level directory? It means there is a directory of ldapuserX under the /home/guests/ldapuserX in the questions. This directory is the real directory.
NEW QUESTION # 98
Configure NTP
Configure your system to synchronize with the NTP server of materials.example.com (Note: materials.example.com is an alias for classroom.example.com).
Answer:
Explanation:
# Install the chrony service for configuring NTP server
[root@node1 ~]# yum -y install chrony
[root@node1 ~]# vim /etc/chrony.conf
server materials.example.com iburst
[root@node1 ~]# systemctl restart chronyd
[root@node1 ~]# systemctl enable chronyd
# Check
# Set an arbitrary time
[root@node1 ~]# date -s "1982-1-1"
Fri Jan 1 12:00:00 AM EST 1982
# Restart the NTP server
[root@node1 ~]# systemctl restart chronyd
# Check if the time is synchronized
# Execute after 3-5 seconds, too fast won't synchronize the time
[root@node1 ~]# date
Tue Dec 12 11:40:19 PM EST 2023
# Use the chronyc command to check synchronization status
[root@node1 ~]# chronyc sources -v
.-- Source mode '^' = server, '=' = peer, '#' = local clock.
/ .- Source state '*' = current best, '+' = combined, '-' = not combined,
| / 'x' = may be in error, '~' = too variable, '?' = unusable.
|| .- xxxx [ yyyy ] +/- zzzz
|| Reachability register (octal) -. | xxxx = adjusted offset,
|| Log2(Polling interval) --. | | yyyy = measured offset,
|| \ | | zzzz = estimated error.
|| | | \
MS Name/IP address Stratum Poll Reach LastRx Last sample
^* classroom.lab.example.com 8 6 17 42 -14us[ -11us] +/- 463us
NEW QUESTION # 99
Install the appropriate kernel update from http://server.domain11.example.com/pub/updates.
The following criteria must also be met:
The updated kernel is the default kernel when the system is rebooted
The original kernel remains available and bootable on the system
Answer:
Explanation:
ftp server.domain11.example.com Anonymous login
ftp> cd /pub/updates ftp> ls
ftp> mget kernel* ftp> bye
rpm -ivh kernel*
vim /etc/grub.conf
Check the updatted kernel is the first kernel and the orginal kernel remains available. set default=0 wq!
NEW QUESTION # 100
SIMULATION
Search a String
Find out all the columns that contains the string seismic within /usr/share/dict/words, then copy all these columns to /root/lines.tx in original order, there is no blank line, all columns must be the accurate copy of the original columns.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: grep seismic /usr/share/dict/words > /root/lines.txt
NEW QUESTION # 101
......
To pass the RedHat EX200 exam, candidates must demonstrate their ability to perform tasks efficiently and accurately using the command line interface. They must also have a good understanding of Red Hat Enterprise Linux system administration concepts and be able to troubleshoot common issues that may arise. Achieving the RHCSA certification demonstrates to employers and colleagues that an IT professional has the necessary skills and knowledge to manage and maintain Red Hat Enterprise Linux systems, making it a valuable certification for those seeking career advancement in the IT industry.
Top RedHat EX200 Courses Online: https://www.vceengine.com/EX200-vce-test-engine.html
Free RedHat EX200 Exam Questions and Answer from Training Expert VCEEngine: https://drive.google.com/open?id=17p3AH6pYnO-Z84IkD8eGXcOzFypH7b7m
