Use the best ways of preparing for C1000-055 Exam Dumps with VCEEngine IBM C1000-055 dump PDF [2021]
IBM C1000-055 exam candidates will surely pass the Exam if they consider the C1000-055 dumps learning material presented by VCEEngine.
NEW QUESTION 12
A deployment professional needs to create a SIEM architecture plan. The deployment professional needs to consider applying a set of security policies (or questions) about the client's network and monitor the policies for changes. It is important also to query all network connections, compare device configurations, filter the network topology, and simulate the possible effects of updating device configurations.
Which component can be added to the deployment to meet this security business objective?
- A. QRadar Vulnerability Manager
- B. QRadar Incident Forensics
- C. QRadar Network Insights
- D. QRadar Risk Manager
Answer: A
NEW QUESTION 13
A deployment professional sees that there are occasional spikes in the EPS (Events per second). The host has
1000 EPS allocated but the occasional spikes go up to 1185 EPS.
What happens with the events when they go over the allocated amount?
- A. Events are dropped.
- B. Events are shown normally, but no offenses are generated.
- C. Events are shown normally, QRadar has 20% buffer.
- D. Events are moved to a temporary queue.
Answer: D
NEW QUESTION 14
As a small company has grown, no standard was defined. Each time the network was expanded, the bid with the lowest cost was accepted. As a result, the infrastructure is a mix of equipment from different manufactures.
A deployment professional is planning on standardizing flow collection. Which flow source data format should the deployment professional use?
- A. J-Flow
- B. NetFlow
- C. sFlow
- D. A-Flow
Answer: C
NEW QUESTION 15
A deployment professional is asked to create QRadar deployment architecture for a company.
The company has three branch offices with WAN connection between them. The head office data center requires 14000 EPS and 200000 FPM. Each branch requires 4000 EPS and 200000 FPM.
Which deployment solution will meet the minimum requirements?
- A. QRadar 3129 (Console) in head office + QRadar 1805 Event and Flow Processor in each branch office
- B. QRadar 3105 (Console) in head office + QRadar 1805 Event and Flow Processor in each branch office
- C. QRadar 3105 (Console) and QRadar Event and Flow Processor 1829 in head office + QRadar 1805 Event and Flow Processor in each branch office
- D. QRadar 3129 (All-in-One) in head office
Answer: B
NEW QUESTION 16
During an initial deployment, three retention buckets (longret, midret. testret) were configured with the following characteristics, being (X) the number of the bucket:
longret (1): keep data in this bucket for 2 years. Delete when storage is needed.
midret (2): keep data in this bucket for 6 months. Delete when storage is needed.
testret (3): keep data in this bucket for 3 days. Delete immediately after expiration.
Default (0) retention bucket has a 3 months / delete immediately policy.
During testing last week, a significant amount of test data has been mistakenly categorized as "longret". This bucket does not contain any other important information. Everything else, including some important data, has been saved into the default bucket.
How can the deployment professional remove all data stored in the "longret" bucket?
- A. Change the longret bucket period to 10 days and deploy the changes.
- B. Manually delete the files ending by -1 from /store/ariel/events/payloads/ and /store/ariel/events/records/
- C. Change the system's time to 2 years in the future and wait until deletion has been made and then go back to the real system's time.
- D. Manually delete old data from last week by issuing a rm * on /store/ariel/events/payloads/ and
/store/ariel/events/records/ and select the directories containing events from the last week
Answer: A
NEW QUESTION 17
A company has a large network with multiple segments. The manufacturing area network and the research and development (R&D) area network are separated from the product area network, and the customer does not want to run scanners through firewalls. A deployment professional has been tasked with proposing a strategy to ensure vulnerability assessment operations cover all company assets.
In addition to a scanner in the production area network, which option should the deployment professional follow?
- A. Deploy a vulnerability processor on a QRadar Managed Host in the manufacturing area network and in the R&D area network.
- B. Deploy a hosted IBM scanner appliance in the manufacturing area network and in the R&D area network.
- C. Deploy a vulnerability manager on a QRadar Managed Host in the manufacturing area network and in the R&D area network.
- D. Deploy a vulnerability scanner on a QRadar Managed Host in the manufacturing area network and in the R&D area network.
Answer: A
NEW QUESTION 18
A deployment professional needs to create Identity Excluded Searches so as to prevent specific Asset entries from being created. These Asset entries are being created from the events that the QRadar deployment is receiving from different Log Sources.
To add to these Identity Excluded Searches, which type of Saved Searches should be created?
- A. Searches containing last 15 Minutes Data
- B. Real Time Searches
- C. Searches containing last 24 Hours data
- D. Searches containing last 7 Days data
Answer: B
NEW QUESTION 19
A company that is located in the United States wants to expand its existing QRadar deployment to data centers located in Europe. The European branch needs to keep its data in-country and must comply with local data retention regulations.
What can the deployment professional do to comply with local data laws?
- A. Install Event and Flow Processors in the European data center.
- B. Install Data Nodes in the European data center.
- C. Install Event and Flow Collectors in the European data center.
- D. Install Event and Flow Processors in the United States data center.
Answer: C
NEW QUESTION 20
A deployment professional has been asked to ensure that the system has access to information which can be used by rules to acquire information extracted from a user information source such as Active Directory or LDAP.
Which information repository should the deployment professional store this data in?
- A. Reference Data
- B. Ariel Database
- C. Docker containers
- D. Asset profiles
Answer: C
NEW QUESTION 21
A deployment professional is working on integrating an unsupported log source. The log source is able to send events in multiple formats. The administrators of the log source ask which event format should be configured.
Which event format should the deployment professional choose to be able to use direct parsing support in QRadar's DSM editor?
- A. SAML
- B. Regex
- C. BLOB
- D. LEEF
Answer: C
NEW QUESTION 22
A deployment professional is creating an architecture for a customer who has locations which regularly go out of contact with the rest of the network. The requirement is to receive logs locally and then have a scheduled connection to QRadar to upload the events.
Which QRadar appliances should be deployed in these locations?
- A. 15xx Event Collector with a Store and Forward schedule
- B. 31 xx All-in-One with Online Forwarding configured
- C. 16xx Event Processor with a Store and Forward schedule
- D. Disconnected Log Collector with UDP configured
Answer: C
NEW QUESTION 23
A deployment professional needs to clear out the Asset Database in IBM QRadar. Which service on the Console is restarted when script cleanAssetModel.sh is executed?
- A. Tomcat
- B. Hostservices
- C. PostgressDB
- D. Hostcontext
Answer: B
NEW QUESTION 24
A deployment professional is about to execute Server Discovery to populate the Host Definition Building Blocks. The deployment professional is working in a monitored environment and does not wish to set off any network scanner alarms.
What step should the deployment professional take to ensure that good results are returned and that no alarms are raised?
- A. Warn the network monitoring team that QRadar is about to run a network port scan
- B. Ensure that the flow sources are configured correctly and collecting data
- C. Set the 'Passive discovery' flag in Advanced System Settings in the Admin tab
- D. Ensure that events from the relevant servers are being collected successfully
Answer: C
NEW QUESTION 25
A company has specific data retention policies to keep log data online for 5 years. The current QRadar storage will not handle this amount of data.
Which are possible solutions? (Choose two)
- A. Implement a high availability (HA) solution
- B. Implement Event Collector(s)
- C. Implement Flow Processor(s)
- D. Migrate the QRadar /store/ariel file system to a larger off board storage device
- E. Implement Data Node(s)
Answer: C,D
NEW QUESTION 26
A deployment professional needs to find out which rules are generating most of the offenses. What should the deployment professional do? (Choose two)
- A. Offenses -> By Category
- B. Offenses -> Rules -> Sort by Offense Count
- C. Use search where Log source is Health Metrics-2 :: <qradar hostname> and choose Grouping by Event Name
- D. Generate Report "System Summary"
- E. Use search where Log source is Custom Rule Engine-8 :: <qradar hostname> and choose Grouping by Event Name
Answer: B,D
NEW QUESTION 27
......
Accurate & Verified Answers As Seen in the Real Exam here: https://www.vceengine.com/C1000-055-vce-test-engine.html
