300-620 Actual Questions - Instant Download Tests Free Updated Today!
Get instant access of 100% real Cisco 300-620 exam questions with verified answers
Difficulty in Attempting Implementing Cisco Application Centric Infrastructure (300-620 DCACI)
There are lots of issues a prospect faces when potential candidate starts preparing yourself for the Cisco 300-620 Exam. If a prospect intends to prepare his for the Cisco 300-620 evaluation without any issue in addition to in a similar way get outstanding high qualities in the. After that they require to choose the greatest Cisco 300-620 exam dumps genuine issues method. There are great deals of web internet sites that are supplying the most present Cisco 300-620 exam issues along with reactions yet these worries are not verified by Microsoft recognized experts which's why different are fallen short in their merely preliminary initiative. VCEEngine is the straight-out excellent platform which uses the possibility with the vital Cisco 300-620 issues that will most definitely assist him to pass the Cisco 300-620 on the extremely really first time. In order to save time experts and professionals recommend CISCO 300-620 practice exams for the exam preparation
VCEEngine CISCO 300-620 practice exams will help to prepare exam in short time with 100% real success.
NEW QUESTION # 12
A network engineer must configure a new SNMP configuration and syslog servers. The requirement is for all faults and events related to endpoint groups, bridge domains, and VRFs to be sent to it. Which action must be taken to meet the requirements?
- A. Enable access monitoring policies on the required endpoint groups, bridge domains, and VRFs.
- B. Configure fabric monitoring policies and attach to the spine switch in the fabric.
- C. Utilize common tenant monitoring policies in the Cisco APIC.
- D. Implement fabric-wide monitoring policies on all nodes.
Answer: D
NEW QUESTION # 13
Which description regarding the initial APIC cluster discovery process is true?
- A. The APIC discovers the IP address of the other APIC controllers by using Cisco Discovery Protocol.
- B. The APIC uses an internal IP address from a pool to communicate with the nodes.
- C. The ACI fabric is discovered starting with the spine switches.
- D. Every switch is assigned a unique AV by the APIC.
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/ b_ACI-Fundamentals/b_ACI-Fundamentals_chapter_010011.html
NEW QUESTION # 14
What are two requirements for the IPN network when implementing a Multi-Pod ACI fabric? (Choose two.)
- A. OSPF routing
- B. EIGRP routing
- C. BGP routing
- D. PIM ASM multicast routing
- E. VLAN ID 4
Answer: A,E
NEW QUESTION # 15
An organization has encountered many STP-related issues in the past due to failed hardware components. They are in the process of long-term migration to a newly deployed ACI fabric. Senior engineers are worried that spanning-tree loops in the existing network may be extended to the ACI fabric. Which feature must be enabled on the ACI leaf ports to protect the fabric from spanning-tree loops?
- A. BPDU Guard
- B. per-VLANMCP
- C. BPDU Filter
- D. Storm Control
Answer: B
NEW QUESTION # 16
An engineer is implementing a Cisco ACI data center network that includes Cisco Nexus 2000 Series 10G fabric extenders. Which physical topology is supported?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 17
An engineer must connect Cisco ACI fabric using Layer 2 with external third-party switches. The third-party switches are configured using 802.1s protocol. Which two constructs are required to complete the task?
(Choose two.)
- A. dedicated EPG for native VLAN
- B. MCP policy with PDU per VLAN enabled
- C. static binding of native VLAN in all existing EPGs
- D. MCP instance policy with administrative slate disabled
- E. spanning tree policy for mapping MST Instances to VLANs
Answer: A,E
Explanation:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKACI-3101.pdf
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c07-732033.html
NEW QUESTION # 18
When Cisco ACI connects to an outside Layers 2 network, where does the ACI fabric flood the STP BPDU frame?
- A. between all the spine and leaf switches
- B. within the access encap VLAN
- C. within the APIC
- D. within the bridge domain
Answer: B
NEW QUESTION # 19
What must be enabled in the bridge domain to have the endpoint table learn the IP addresses of endpoints?
- A. GARP based detection
- B. unicast routing
- C. L2 unknown unicast: flood
- D. subnet scope
Answer: B
Explanation:
Section: ACI Packet Forwarding
Explanation/Reference: https://hsvglobalschool.in/dhkycw/cisco-aci-bridge-domain.html
NEW QUESTION # 20
Refer to the exhibit.
When the subnet is configured on a bridge domain, on which physical devices is the gateway IP address configured?
- A. all border leaf nodes where the bridge domain of the tenant is present
- B. all leaf switches and all spine nodes
- C. only leaf switches where the bridge domain of the tenant is present
- D. only spine switches where the bridge domain of the tenant is present
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_0111.html
NEW QUESTION # 21
An engineer must advertise a bridge domain subnet out of the ACI fabric to an OSPF neighbor. Which two configuration steps are required? (Choose two.)
- A. Add L50ut profile to the bridge domain using Associated L30uts section
- B. Configure Subnet scope to Advertised Externally
- C. Create Route Control Profile with the export direction under External EPG.
- D. Add External Subnet for External EPG flag under External EPG.
- E. Configure the Subnet under the EPG level.
Answer: A,B
NEW QUESTION # 22
What does a bridge domain represent?
- A. Layer 2 forwarding construct
- B. physical domain
- C. tenant
- D. Layer 3 cloud
Answer: A
NEW QUESTION # 23
When does the Cisco ACI leaf learn a source IP or MAC as a remote endpoint?
- A. When VXLAN traffic arrives on a leaf fabric port from the spine and outer source IP is in the Layer 3 Out EPG subnet range.
- B. When VXLAN traffic arrives on a leaf fabric port from the spine and outer source IP is in the bridge domain subnets range.
- C. When VXLAN traffic arrives on a leaf fabric port from the spine and inner source IP is in the bridge domain subnets range.
- D. When VXLAN traffic arrives on a leaf fabric port from the spine and inner source IP is in the Layer 3 Out EPG subnet range.
Answer: C
NEW QUESTION # 24
Which statement about ACI syslog is true?
- A. Syslog messages are sent to the destination through the spine.
- B. Switches send syslog messages directly to the destinations.
- C. All syslog messages are sent to the destination through APIC.
- D. Notifications for different scopes of syslog objects can be sent only to one destination.
Answer: D
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2016/pdf/BRKACI-2303.pdf
NEW QUESTION # 25
Which components must be configured for the BGP Route Reflector policy to take effect?
- A. spine fabric interface overrides and profiles
- B. access policies and profiles
- C. pod policy groups and profiles
- D. leaf fabric interface overrides and profiles
Answer: A
Explanation:
Section: ACI Fabric Infrastructure
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/L3-configuration/Cisco- APIC-Layer-3-Networking-Configuration-Guide-401/Cisco-APIC-Layer-3-Networking-Configuration-Guide-
401_chapter_01.html
NEW QUESTION # 26
An engineer must configure RADIUS authentication with Cisco ACI for remote authentication with out-of-band management access. Drag and drop the RADIUS configuration steps from the left into the required implementation order on the right. Not all steps are used.
Answer:
Explanation:
NEW QUESTION # 27
What two actions should be taken to deploy a new Cisco ACI Multi-Pod setup? (Choose two.)
- A. Configure MP-BGP on IPN routers that face the Cisco ACI spines.
- B. Increase interface MTU for all IPN routers to support VXLAN traffic.
- C. Configure anycast RP for the underlying multicast protocol
- D. Connect all spines to the IPN.
- E. Configure the TEP pool of the new pod to be routable across the IPN.
Answer: B,D
NEW QUESTION # 28
What must be configured to allow SNMP traffic on the APIC controller?
- A. out-of-band management interface
- B. SNMP relay policy
- C. contract under tenant mgmt
- D. out-of-band bridge domain
Answer: C
Explanation:
Section: ACI Management
NEW QUESTION # 29
Which statement about ACI syslog is true?
- A. Syslog messages are sent to the destination through the spine.
- B. All syslog messages are sent to the destination through APIC.
- C. Switches send syslog messages directly to the destinations.
- D. Notifications for different scopes of syslog objects can be sent only to one destination.
Answer: C
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2016/pdf/BRKACI-2303.pdf
NEW QUESTION # 30
Refer to the exhibit.
Refer to the exhibit. A network engineer must complete the Cisco ACI implementation based on the logical system design created by the systems architect. Which Cisco ACI object is required where the dotted line indicates to complete the task?
- A. attachable Access Entity Profile
- B. contract
- C. context
- D. application profile
Answer: D
NEW QUESTION # 31
An engineer must advertise a bridge domain subnet out of the ACI fabric to an OSPF neighbor. Which two configuration steps are required? (Choose two.)
- A. Configure Subnet scope to Advertised Externally
- B. Create Route Control Profile with the export direction under External EPG.
- C. Add External Subnet for External EPG flag under External EPG.
- D. Configure the Subnet under the EPG level.
- E. Add L30ut profile to the bridge domain using Associated L30uts section
Answer: A,E
NEW QUESTION # 32
......
Download Latest & Valid Questions For Cisco 300-620 exam: https://www.vceengine.com/300-620-vce-test-engine.html
Exam Dumps for the Preparation of Latest 300-620 Exam Questions: https://drive.google.com/open?id=1b6X0Riwg85qYH_0q4n3h_tLsxpeIJhKQ
