Verified NS0-526 dumps Q&As - 100% Pass from VCEEngine
Pass NS0-526 Exam in First Attempt Guaranteed 2021 Dumps!
NEW QUESTION 116
Click the Exhibit button.
Referring to the exhibit, what two Search Criteria check boxes need to be used to provide a supported solution for protecting Windows Server 2019 DCE 64-bit, x64 host using local NetApp LUNs with SnapCenter Server 4.1.1? (Choose two.)
- A. SnapCenter Host Plugin
- B. Browser
- C. SnapCenter Application Plugin
- D. Host OS (OS)
Answer: A,D
NEW QUESTION 117
Your disaster recovery strategy requires a mirror, an archive, and a tape backup. Which software would you recommend for this scenario?
- A. OnCommand Workflow Automation
- B. OnCommand Unified Manager
- C. OnCommand System Manager
- D. SnapProtect
Answer: D
NEW QUESTION 118
Click the Exhibit button.
An employee's computer and mapped home folder has been encrypted with ransomware.
You are asked to restore the data from a SnapVault repository.
Referring to the exhibit, what happens when the volume is restored?
- A. All files in the volume are restored.
- B. The restore is performed locally.
- C. Only files that have changed in the volume are restored.
- D. The original data is decrypted in place.
Answer: A
NEW QUESTION 119
After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.
In this scenario, what are two causes of this problem? (Choose two.)
- A. There is a network disruption between sites.
- B. The vSphere HA service has failed.
- C. The HA interconnect cables have been removed.
- D. ONTAP Deploy has been deleted.
Answer: C
NEW QUESTION 120
You are using a MetroCluster configuration.
Which two Fibre Channel switch vendors are supported for backend replication? (Choose two.)
- A. QLogic
- B. ATTO Technology
- C. Cisco
- D. Brocade
Answer: C,D
NEW QUESTION 121
An ONTAP administrator is trying to configure a three-way-disaster recovery solution. Cluster 2 is within 50 km of Cluster 1, the primary cluster, with an RTT of 7 ms. Cluster 3 is over 300 km from Cluster 1 with an RTT of 29 ms.
In this scenario, what are two topologies that would accomplish this task? (Choose two.)
- A. a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror Synchronous to Cluster 3
- B. a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror asynchronous from Cluster 2 to Cluster 3
- C. a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror Synchronous from Cluster 2 to Cluster 3
- D. a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror asynchronous from Cluster 1 to Cluster 3
Answer: B,D
NEW QUESTION 122
The customer has experienced a disaster at their primary data center. You have implemented a SnapMirror relationship to meet their needs. You have performed the steps to make the destination volume read/write accessible to the clients.
Which three actions should your consider doing while the customer makes the necessary repairs to their data center? (Choose three.)
- A. Delete all Snapshot copies on the destination volume in preparation for a resynchronize operation.
- B. Verify that the destination volume has the same settings as the source volume for compression.
- C. Delete all Snapshot copies on the source volume in preparation for a resynchronize operation.
- D. Verify that the destination volume has the same settings as the source volume for deduplication.
- E. Implement a Snapshot copy schedule on the destination volume.
Answer: B,D,E
NEW QUESTION 123
Click the Exhibit button.
Your customer is deploying SnapCenter to protect volumes on an ONTAP Select cluster.
Referring to the exhibit, which licensing is required to protect the Engineering and Marketing volumes?
- A. a 3 TB SnapCenter capacity-based license
- B. a SnapManagerSuite controller-based license
- C. a 5 TB SnapCenter capacity-based license
- D. a SnapProtectApps controller-based license
Answer: D
NEW QUESTION 124
A customer wants to set up an SVM DR relationship to protect a source SVM that is dedicated for NAS file services. The source and destination clusters are running ONTAP 9.5.
In this scenario, which application accomplishes this task?
- A. OnCommand Unified Manager
- B. Snap Creator
- C. SnapCenter
- D. OnCommand System Manager
Answer: D
NEW QUESTION 125
You have deployed volume-level replication with NetApp Synchronous SnapMirror replication technology.
In this scenario, which two statements are true? (Choose two.)
- A. In StrictSync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.
- B. In Sync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.
- C. In Sync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.
- D. In StrictSync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.
Answer: A,C
NEW QUESTION 126
You are asked to provide a solution that will allow a client to copy the data stored in a FlexVol volume to a remote tape system for archiving. You are using a cluster-aware backup application to perform this task.
Which three actions are required when you configure this solution for your client? (Choose three.)
- A. Configure a LIF for node-scoped NDMP.
- B. Configure multiple LIFs for SVM-scoped NDMP.
- C. Configure NDMP at the node level.
- D. Configure NDMP at the SVM level.
- E. Create a backup user account on the cluster.
Answer: A,C,E
NEW QUESTION 127
Click the Exhibit button.
You are configuring cluster peering from cluster2 to cluster1 on your ONTAP 9.7 clusters using ONTAP System Manager. You are given the details shown below to set up the cluster peer relationship. You want to determine why the peering has failed.
Cluster2 intercluster LIF IP: 192.168.0.143 Subnet: 255.255.255.0 Port: e0e passphrase: netapp1234 Cluster1 intercluster LIF IP: 192.168.0.153 Subnet: 255.255.255.0 Port: e0e passphrase: netapp1234 Referring to the exhibit, which statement is correct?
- A. The Source Cluster Passphrase is incorrect.
- B. The Target Cluster Passphrase is incorrect.
- C. The Source Cluster IP is incorrect.
- D. The Target Cluster IP is incorrect.
Answer: A,D
NEW QUESTION 128
Management wants the ability totransfer more data over a low bandwidth network connection. Which action would satisfy the request?
- A. Enable network compression with a SnapMirror policy.
- B. Enable version flexible replication with a SnapMirror policy.
- C. Disable throttle with a SnapMirror policy.
- D. Modify the SnapMirror schedules.
Answer: A
NEW QUESTION 129
You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up thedatabase. You cannot afford to create any down time for the database.
What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?
- A. Disable SnapDrive for Unix then run the backup from SnapManager for Oracle.
- B. Use SnapManager for Oracle to take the Snapshot copy backup.
- C. Use SnapDrive for Unix to take the Snapshot copy of the database LUN.
- D. Have the database administrator issue a checkpoint to the database then use SnapDrive for Unix to take the Snapshot copy of the database LUN.
Answer: C
NEW QUESTION 130
In a clustered Data ONTAP environment, the customer is using SnapVault to back up data from aprimary to a secondary cluster.
Policies, Resource Pools, and Storage Efficiency are configured in OnCommand Unified Manager 6.
OnCommand Workflow Automation takes care of the secondary provisioning. The customer wants to update the SnapMirror Policy witha custom Snapshot copy label.
What should be done to make sure that the Snapshot copies will be transferred to the secondary cluster?
- A. Re-initialize the SnapMirror relationship and transfer a new baseline.
- B. Add the SnapMirror label in the SnapMirror policy of the secondary system.
- C. Re-initialize the SnapMirror relationship without transferring a new baseline.
- D. Add the SnapMirror label in the efficiency policy of the secondary system.
Answer: C
NEW QUESTION 131
You experience a node outage as a result of a component failure in a high-availability (HA) pair. You replace the failed component and get the node booted up again, but are unable to perform the giveback operation. The onscreen error is:
"Connected to partner, Takeover is not possible: Storage failover mailbox disk state is invalid, Local node has encountered errors while reading the storage failover partner's mailbox disks. Local node missing partner disks" What are two ways to solve this problem? (Choose two.)
- A. Correct the failover group configuration.
- B. Destroy the root aggregate.
- C. Correct the shelf cabling errors.
- D. Destroy the mailboxes on both nodes.
Answer: A,C
NEW QUESTION 132
Beginning with On Command Workflow Automation 3.0, which feature allows you to download and manage your WFA workflow packs from the NetApp resources.
- A. Workflow Automation Community
- B. Workflow Automation External Data Sources
- C. WorkflowAutomation Database
- D. Storage Automation Store
Answer: D
NEW QUESTION 133
When you configure a SnapLock feature, where should the ComplianceClock be initialized?
- A. on all the nodes of the cluster
- B. on each SVM that hosts a SnapLock volume
- C. on each node that hosts a SnapLock aggregate
- D. on each aggregate that hosts a SnapLock volume
Answer: C
NEW QUESTION 134
......
NetApp NS0-526 Exam Certification Details:
| Passing Score | 65% |
| Exam Name | Implementation Engineer Data Protection Specialist |
| Duration | 90 minutes |
| Number of Questions | 60 |
| Recommended Training | ONTAP Data Protection Administration (ILT) ONTAP MetroCluster Installation (ILT) ONTAP Data Protection Fundamentals (WBT) |
| Sample Questions | NetApp NS0-526 Sample Questions |
| Exam Code | NS0-526 NCIE-Data Protection Specialist |
| Exam Price | $150 USD |
| Exam Registration | PEARSON VUE |
NS0-526 Dumps Full Questions - Exam Study Guide: https://www.vceengine.com/NS0-526-vce-test-engine.html
