Check the Available HPE0-S60 Exam Dumps with 82 QA's UPDATED 2023
Download HPE0-S60 Exam Dumps Questions to get 100% Success in HP
NEW QUESTION # 14
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 15
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 16
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?
- A. Four compute modules must be moved to the second frame to balance the configuration
- B. A license for an extended logical enclosure must be added to HPE OneView through GUI
- C. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked
- D. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
Answer: C
NEW QUESTION # 17
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At HPE OneView Interface to verify whether the server is In the maintenance mode
- B. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
- C. At the iLO interface to verify whether the ILO Advanced license is properly applied
- D. At HPE OneView Interface to verify whether the iLO processor is disabled
Answer: C
NEW QUESTION # 18
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 19
Which statement about a new HPE SimpliVity deployment is true?
- A. AM new HPE SimpliVity models are software optimized
- B. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
- C. A new HPE SimpliVity node can be a member of multiple dusters
- D. All new HPE SimpliVity models are based on mid CPUs
Answer: B
NEW QUESTION # 20
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- B. This logical JBOD can be presented to the compute nodes in a different frame.
- C. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
- D. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
Answer: D
NEW QUESTION # 21
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex 280 They plan to manage new components using HPE OneView What must be done to achieve this goal?
- A. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- B. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- C. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
- D. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
Answer: D
NEW QUESTION # 22
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If there is at least one ISCSI network configured that will provide access to the module.
- B. If the D3940 module is imported in managed state that allows volume provisioning.
- C. If there Is a logical interconnect created based on the 12Gb SAS switches.
- D. If the D3940 storage module is property licensed through HPE OneView interface.
Answer: B
NEW QUESTION # 23
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)
- A. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
- B. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- C. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
- D. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
- E. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
- F. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
Answer: A,B
NEW QUESTION # 24
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
- B. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
- C. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
- D. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
Answer: D
NEW QUESTION # 25
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 26
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?
- A. vSphere Standard license
- B. Load balancing cluster
- C. Virtual Distributed Switch
- D. Dedicated VMKernel port
Answer: D
NEW QUESTION # 27
Match HPE Superdome Flex system with its specific feature.
Answer:
Explanation:
NEW QUESTION # 28
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
NEW QUESTION # 29
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. App Volume Set
- B. Virtual Volume Set
- C. Storage Container
- D. virtual Volume
Answer: B
NEW QUESTION # 30
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
1 - Add vCenter Server to HPE OneView for VMware vCenter Server.
2 - Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
3 - Upload HPE-friendly ESXi image.
4 - Deploy new ESXi systems using vCenter Server interface.
NEW QUESTION # 31
Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.
Which procedures should De performed during the expansion process? (Select two.)
- A. Create a new logical interconnect group and enclosure group for two frames setup
- B. Modify an existing logical interconnect to include second HPE Synergy frame.
- C. Create a new logical enclosure based on both HPE Synergy frames.
- D. Re-parent an existing enclosure group to the new logical interconnect group.
- E. Move one of the master modules to the appropriate interconnect bay in the second frame.
Answer: B,C
NEW QUESTION # 32
Click the area within the iLO management interface that will allow you to access workload Advisor.
Answer:
Explanation:
NEW QUESTION # 33
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
- C. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
Answer: B
NEW QUESTION # 34
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?
- A. At least Tour HPE Persistent Memory DIMMs per nPar
- B. One base chassis and three expansion chassis with licenses
- C. HPE Superdome Flex Grid licenses enabling connectivity between chassis
- D. Rack Management Controller for nPar management
Answer: B
NEW QUESTION # 35
......
IT professionals who pass the HP HPE0-S60 exam can validate their knowledge and skills in HPE compute solutions and demonstrate their ability to deploy, manage, and troubleshoot HPE compute solutions. Additionally, passing HPE0-S60 exam can help IT professionals enhance their career prospects and gain recognition in the IT industry. HPE0-S60 exam is an essential requirement for professionals who want to earn the HPE ATP - Hybrid IT Solutions V1 certification or the HPE ASE - Server Solutions Architect V4 certification.
Best Value Available! 2023 Realistic Verified Free HPE0-S60 Exam Questions: https://www.vceengine.com/HPE0-S60-vce-test-engine.html
100% Accurate Answers! HPE0-S60 Actual Real Exam Questions: https://drive.google.com/open?id=1M2MPijcNe0HaNyuRZAQhkst8ehE2ph9X
