Read Online CWDP-304 Test Practice Test Questions Exam Dumps
Easily To Pass New CWDP-304 Premium Exam Updated [Feb 13, 2024]
NEW QUESTION # 52
You are tasked with designing the WLAN to accommodate certain high density areas on your university campus where users frequently come and go. With a limited DHCP pool size (subnet mask = 255.255.252.0) for this WLAN subnet, you want to ensure that your DHCP addresses are used efficiently and are not exhausted, which would prevent new client Layer 3 connections. The DHCP server is a Windows Server 2012 R2 machine.
Your design task is to determine the best configuration to allow as many users as possible while avoiding WLAN service interruptions and also to use the available addresses as efficiently as possible.
What setting would be most effective at achieving this design task?
- A. Set the inactive wireless client timeout (client age-out) to 5 minutes
- B. Set the RTS threshold to 2346 bytes
- C. Set the maximum client limit per radio to 64
- D. Set the DHCP lease for this pool to 20 minutes
Answer: D
NEW QUESTION # 53
When designing a WLAN to support voice in a large office, which design element is of the highest concern for performance?
- A. Roaming
- B. AP vendor
- C. Band steering
- D. Frequency Selection
Answer: A
NEW QUESTION # 54
You have initiated a site survey to be performed and the team has been onsite and is halfway through gathering the necessary data.
The project sponsor just asked you to make sure the WLAN supports radio frequency identification (RFID) location tracking. How would you possibly characterize this situation?
Response:
- A. The 802.11g standard incorporates location tracking.
- B. Scope creep has occurred.
- C. The 802.3af RTLS standard should be incorporated into the AP configuration.
- D. The power requirements on the UPS need to be evaluated.
- E. Any WLAN will support location tracking.
Answer: B
NEW QUESTION # 55
As you plan a WLAN upgrade, you have assessed the network requirements and data signatures of your applications. One of the popular applications used on your network requires high bandwidth and low to medium Wi-Fi loss, but can tolerate moderate latency and jitter.
What application matches this description?
- A. Video-on-demand
- B. Voice
- C. Email
- D. Skype chat
Answer: C
NEW QUESTION # 56
You are conducting a physical site survey where heavy machinery is repaired. What is a common item required specifically for this type of survey?
- A. Low power APs
- B. Personal Protective Equipment (PPE)
- C. Indoor APs
- D. Low gain antennas
Answer: B
NEW QUESTION # 57
A controller-based WLAN infrastructure has its controller on a different subnet than its APs. What device must be used to enable any communication between the Controller and the APs?
- A. PoE Layer 2 switch
- B. Router
- C. NTP server
- D. Wireless bridge
Answer: B
NEW QUESTION # 58
Who should be in the final meeting from the customer-side after successfully implementing a WLAN infrastructure?
- A. Remote workers
- B. End-users
- C. CEO or CFO
- D. The customer's customers
Answer: B
NEW QUESTION # 59
NicoCo is building a new facility and would like to install a WLAN for primary connectivity of all clients. The requirements are dual-spectrum 802.11n supporting voice and location tracking.
What type of pre-deployment survey should be performed?
Response:
- A. Passive, using optimized channels
- B. Passive, all channels
- C. Predictive
- D. Active, using a lowest common denominator client
- E. Active, using a voice handset
Answer: C
NEW QUESTION # 60
After importing a floor plan to a predictive design tool, what should be done prior to adding APs, antennas and attenuators (e.g., walls)?
- A. Set the transmit power for all APs
- B. Add pictures of the environment
- C. Calibrate the floor plan to increase accuracy
- D. Nothing; just begin by adding APs, antenna and attenuators
Answer: C
NEW QUESTION # 61
Using a SCA means that all APs will be using the same channel in a given layer. How is the AP with which the client associates determined?
- A. All APs share a virtual Multicast Address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.
- B. All APs share a virtual BSSID. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.
- C. All APs share a virtual IP address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.
- D. The client selects the AP based on a known set of MAC to BSSID mappings stored in the clients authorized SSID listing.
Answer: C
NEW QUESTION # 62
Name the audience type not addressed in this chapter for HLDs.
Response:
- A. Designers
- B. Engineering
- C. Operations
- D. Executives
Answer: C
NEW QUESTION # 63
How are EAP messages transported over 802.11 wireless LANS?
Response:
- A. EAP_TLS
- B. EAP-Fast
- C. EAPOL
- D. PEAP
Answer: C
NEW QUESTION # 64
You are validating association capabilities from clients to an 802.1X/EAP secure SSID. The RADIUS server's IP address is 10.100.50.25 and the default RADIUS authentication port is used. When testing them, none of the clients are able to associate to the SSID. Troubleshooting the WLAN infrastructure, you found out that the server is up and the RADIUS service is up as well, but the authenticator is not able to communicate properly with the server. What's your next troubleshooting step?
- A. Restart the RADIUS service
- B. Reboot the server
- C. Reboot the clients
- D. Verify that the shared secret between the authenticator and the RADIUS server is correct
Answer: D
NEW QUESTION # 65
An engineering firm just upgraded their WLAN form nine 802.11n APS to nine 802.11ac APs. After this upgrade, they did not see any improvement in throughput.
What is the most likely cause of this result?
- A. APs are mounted on the wall
- B. The APs are still using the 5 GHz lower band
- C. APs are transmitting at a low transmit power
- D. The clients were not upgraded
Answer: D
NEW QUESTION # 66
Modulation can be defined as:
Response:
- A. The process of encoding data symbols using a carrier frequency
- B. The process of modifying a carrier signal to represent data
- C. The process of representing data using RF coding
- D. The process of incorporating a chipping code to build resilience
Answer: B
NEW QUESTION # 67
For what types of systems should you request read-only access to in order to perform an analysis of the customer's existing infrastructure?(Choose all that apply.) Response:
- A. RADIUS
- B. Switches
- C. Clients
- D. Routers
- E. Active Directory
Answer: B,D
NEW QUESTION # 68
A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have the APs blend into the design of the museum. What should you do to meet this requirement?
Response:
- A. Use a plastic cover that could blend in with the environment
- B. Use an 802.11b AP, so it looks old enough to be in a museum
- C. Place the APs in between walls and I-beams
- D. Lock the AP inside of a metal box
Answer: A
NEW QUESTION # 69
......
CWDP-304 Certification All-in-One Exam Guide Feb-2024: https://www.vceengine.com/CWDP-304-vce-test-engine.html
Get Real CWDP-304 Exam Dumps [Feb-2024] Practice Tests: https://drive.google.com/open?id=1pnHfhBK3436d6tMcYstJnAowsyWnHYyd
